The 2014 Honda Civic requires 0W-20 full synthetic engine oil.
In detail, Honda’s owner’s manual specifies 0W-20 viscosity for 2014 Civics sold in North America, covering the common 1.8L engine. Always verify the exact specification for your trim and climate on the owner’s manual or the under-hood label. Use an oil that meets API SN (or newer) and ILSAC GF-5 (or newer), and select a high-quality full-synthetic or synthetic-blend motor oil.
Official oil specification
The following summarizes the official guidance on the oil grade and compatibility for the 2014 Civic.
- 0W-20 full synthetic oil (preferred; meets API SN or newer and ILSAC GF-5 or newer)
Using the recommended 0W-20 helps with fuel economy and engine protection across operating conditions.
Oil capacity and change guidance
For planning maintenance, here are practical capacity figures and upkeep notes.
- Oil capacity with filter: approximately 3.7 quarts
- Follow the Maintenance Minder and replace the oil and filter at the indicated interval; use a compatible oil filter and check for leaks after service
Adhering to these guidelines ensures proper lubrication and dependable performance for the 2014 Civic.
Summary
In summary, the 2014 Honda Civic uses 0W-20 full synthetic oil (or a synthetic blend meeting the same spec), with an oil capacity of about 3.7 quarts. Replace oil and filter as indicated by the maintenance minder, using a quality oil that meets API SN or newer and ILSAC GF-5 or newer.