The 2014 Town and Country generally requires SAE 5W-20 motor oil that meets Chrysler MS-6395 and API SN (or newer). Synthetic or synthetic-blend formulations are acceptable.
In 2014, the Town and Country was commonly equipped with the 3.6L Pentastar V6. The official specification calls for 5W-20 viscosity and a motor oil that meets API SN or newer standards, along with Chrysler’s MS-6395 certification. Most owners use synthetic or synthetic-blend oil, and the typical fill capacity with a filter is around 5.7 quarts. Always confirm the exact requirements for your vehicle by checking the owner’s manual or the label under the hood, especially if your van has a different engine or market configuration.
Oil specifications for the 2014 Town and Country
The following are the core oil requirements and practical guidance for the 2014 Town and Country.
- Viscosity: SAE 5W-20
- Oil type: Full synthetic or synthetic-blend acceptable
- Oil specification: Meets API SN (or newer) and Chrysler MS-6395
- Capacity: About 5.7 quarts (with filter)
- Change interval: Per the owner’s manual or maintenance minder system; typically every 6,000–7,500 miles under normal driving, more often in severe conditions
Bottom line: For most 2014 Town and Country models with the 3.6L engine, use 5W-20 motor oil that meets MS-6395/API SN or newer, in synthetic or synthetic-blend form, and approximate the fill at 5.7 quarts.
Summary
The 2014 Chrysler Town and Country typically requires 5W-20 engine oil meeting Chrysler MS-6395 and API SN or newer standards, with synthetic or synthetic-blend options allowed. Use about 5.7 quarts of oil, and follow the maintenance schedule in the owner’s manual for best results.