The 2013 Honda Accord with the 3.5-liter V6 uses SAE 5W-20 synthetic motor oil, with a total fill of about 5.5 quarts including the filter. Always confirm the exact specification on your owner’s manual or the under-hood label for your specific vehicle.
Official oil specification for the 3.5L V6
The following details summarize the manufacturer’s recommended oil viscosity, type, certification, and capacity to help you select the correct oil.
- Viscosity: SAE 5W-20
- Oil type: Full synthetic preferred; synthetic blend acceptable if specified by the manual
- Certification: API SN or higher; ILSAC GF-5 or higher
- Capacity: Approximately 5.5 quarts with filter
Concluding note: Use a high-quality oil that meets the above standards and replace the filter at every oil change. Verify the exact capacity and recommendations in your vehicle’s manual.
Maintenance and practical considerations
In typical daily driving, sticking to 5W-20 synthetic helps with fuel efficiency and cold starts. In extreme temperatures or heavy-duty use, consult Honda service to confirm if a different viscosity is recommended for your climate and driving pattern.
Additional tips for oil changes
- Always use a correctly sized oil filter for your engine. - Use a torque wrench to tighten the drain plug to the manufacturer’s specification. - Follow the maintenance minder or owner’s manual for replacement intervals; synthetic oils often allow longer intervals than conventional oils.
Summary
For the 2013 Honda Accord 3.5, the recommended oil is SAE 5W-20 synthetic oil, with a total capacity of about 5.5 quarts including the filter. Use a high-quality oil that meets API SN or higher and ILSAC GF-5 or higher, and refer to your owner’s manual for exact intervals and climate-specific guidance.