Most 2015 Camry models use standard halogen headlights with low-beam 9006 bulbs and high-beam 9005 bulbs; fog lights typically use H11. Higher trims may feature projector headlights with HID or LED elements. The exact bulb type varies by trim and market, so check your owner’s manual or the label on the headlight housing to confirm the correct bulb.
Headlight bulb types by trim
Trims and options vary across markets; here’s a practical guide to what you’re likely to find on typical US-spec Camrys from that year.
Markets and trim differences
In North America, base models commonly use halogen headlights, while higher trims may offer projector headlights with optional HID. Some regions also offered LED daytime running lights or HID headlights on top trims. Always verify with your vehicle’s documentation or the headlight housing label.
- Base L/LE models: halogen reflector headlights; low-beam bulbs are typically 9006 (HB4), high-beam bulbs 9005 (HB3); fog lights use H11.
- SE/XSE models: often use projector-style halogen headlights; still typically 9006 low-beam and 9005 high-beam; HID projectors are available on some markets/trims.
- XLE and Limited (and select hybrids): higher trims may offer projector headlights with HID bulbs (commonly D2S/D3S or D4S bases) or other upscale lighting options depending on market.
The above configurations cover common setups. Exact bulb bases can vary by market and production year, so verify with the owner’s manual or the headlight housing sticker on your car.
How to verify and replace bulbs
If you’re replacing a failed headlight bulb, follow these steps to confirm the correct type and complete the swap safely.
- Identify your trim and check the owner’s manual or the label on the headlight housing for the bulb specification.
- Purchase the correct bulb type for your configuration (halogen 9006 low-beam or 9005 high-beam; H11 for fog lights; HID variants will use HID bulbs such as D2S/D3S or D4S, depending on market).
- For halogen headlights: disconnect the battery negative terminal, remove the dust cap from the back of the headlight housing, twist the bulb counterclockwise to release it, unplug the wiring connector, and replace with the new bulb. Reconnect everything and reseat the dust cap.
- For HID headlights: avoid touching the glass with bare hands; disconnect power, remove the bulb from the ballast assembly as instructed by the service manual, and replace with the correct HID bulb. Reattach the ballast and wiring, then test the low beam after reassembly.
- Reinstall any covers, reattach the battery terminal, and test the headlights to ensure proper operation and alignment.
- If you’re unsure or the vehicle has a complex HID/LED system, consider having a professional perform the replacement to avoid damage or improper alignment.
Always replace bulbs in pairs when one fails, and ensure proper alignment after installation to maintain optimal visibility and prevent glare for other drivers.
Summary
The 2015 Toyota Camry can use different headlight configurations depending on trim and market. The most common setup in base models is halogen with 9006 low-beam and 9005 high-beam, plus H11 fog lights. Higher trims may feature projector headlights with HID or LED elements. Always confirm the exact bulb type by consulting the owner’s manual or the light housing label, and follow proper replacement procedures for halogen or HID systems. For complex setups or country-specific options, a Toyota dealer or qualified technician can provide precise guidance.