The 2016 Chrysler 200 uses halogen H11 low beams with 9005 high beams on most trims. Some higher trims offer factory HID headlights that use HID bulbs with ballast (commonly D3S). The exact bulb type depends on your trim and options.
Use the guidance below to identify your configuration and match the correct bulb replacements.
Halogen headlight configuration
If your 2016 Chrysler 200 has halogen headlights, the typical bulb types are:
- Low beam: H11
- High beam: 9005 (HB3)
- Fog lights: usually H11
Bulbs in halogen systems are replaceable individually. When replacing, handle bulbs with gloves or a clean cloth to avoid skin oils that can shorten bulb life, and consider replacing in pairs on the same axle for even brightness and color match.
Factory HID headlight configuration
On models equipped with factory HID headlights, the headlight bulbs are HID and operate with a ballast. The most common configuration uses D3S bulbs, though some markets or production periods used D2S. This setup requires the ballast and wiring harness and is not interchangeable with standard halogen bulbs.
- Bulb type: D3S (HID) with ballast (D2S is possible in some configurations)
Because HID systems involve ballast electronics, replacement often involves the entire HID assembly or a professional service to ensure proper alignment and performance.
How to confirm your specific bulb type
To ensure you purchase the correct bulbs, use one of these verification methods:
- Check the vehicle’s owner's manual or dealership service sheet for the exact bulb specification for your trim.
- Inspect the back of the headlight housing or bulb socket for the printed bulb type.
- Look up your VIN in a parts catalog or at a Chrysler dealer to see the factory-installed configuration.
Production changes and trim options can alter bulb type, so verify before buying replacements.
Summary
For most 2016 Chrysler 200 models, halogen headlights use H11 low beams and 9005 high beams (with H11 for fog lights). An optional factory HID configuration uses HID bulbs such as D3S with a ballast. Confirm your specific trim and options to choose the correct bulbs.