The typical replacement for a 2013 Honda CR-V in the United States is an H11 bulb for the low beams and a 9005 (HB3) bulb for the high beams. Variations can occur by market and trim, so always verify on your specific vehicle.
Headlight bulbs are a common maintenance item, but getting the right type matters for beam pattern, brightness, and electrical compatibility. This guide breaks down the most likely configurations, how to confirm yours, and how to replace a failing bulb safely.
Common headlight bulb configurations for the 2013 CR-V
US-market baseline
In the United States, the 2013 CR-V commonly uses an H11 bulb for the low-beam/parking light portion and a 9005 (HB3) bulb for the high beams. This setup is typical across many trims and body styles from that year.
Before purchasing replacements, confirm the exact bulb type by inspecting the current bulbs in your car, consulting the owner's manual, or using a parts lookup that references your VIN.
The following list reflects the most widely encountered pairing for US-spec 2013 CR-Vs. Markets outside the U.S. may differ, so treat it as a baseline rather than a universal rule.
- Low beam: H11
- High beam: 9005 (HB3)
Note: Some international markets or certain trims may use different bulbs for one or both beams. Always verify on your specific vehicle to avoid buying the wrong type.
How to verify and replace headlight bulbs
To confirm the exact bulb needs and complete a safe replacement, follow these steps. While the process is similar across 2013 CR-V models, some vehicles may have slight variations in clips or connectors.
- Park on a flat surface, turn off the engine, and open the hood to access the headlight assemblies.
- Locate the back of the headlight housing and disconnect the electrical connector from the bulb.
- Remove any retaining clip, ring, or dust cover securing the bulb, then carefully pull the bulb straight out. Note its orientation for correct installation.
- Visually compare the removed bulb to your replacement to confirm the correct type (e.g., H11 for low beam, 9005 for high beam in US-spec models).
- Install the new bulb in reverse order, reconnect the electrical connector, and test the headlights before closing the hood.
Safety tip: Handle bulbs with clean hands or gloves. Oils from skin can shorten bulb life, and bulbs can become very hot during use.
Summary
The 2013 Honda CR-V most commonly uses H11 for low beams and 9005 for high beams in the United States, with potential variations by market and trim. Always verify the exact bulb type for your vehicle by checking the current bulb, consulting the owner's manual, or using a VIN-specific parts lookup. When buying replacements, choose quality bulbs and follow safe replacement practices to maintain optimal lighting performance.