Most 2013 Impreza models with halogen headlights use H11 for the low beam, 9005 for the high beam, and H11 for fog lights. If your car has HID or LED headlights, the bulb types and replacement process are different and will require the appropriate ballast or LED module.
The following provides a practical guide to the common configurations for that model year, along with steps to verify your exact setup before purchasing replacements.
Bulb types by function in typical 2013 Impreza halogen setups
Below is a quick reference to the bulbs used for standard halogen headlamps that were common on many 2013 Impreza trims. The exact bulb type can vary by trim level and region, so verify on your vehicle if in doubt.
- Low beam (dipped headlights): H11 halogen bulb
- High beam (main beam): 9005 (HB5) halogen bulb
- Front fog lights: H11 halogen bulb
When replacing bulbs, ensure you buy the correct wattage and check for any differences between European and North American specs for certain trims.
Special cases: HID or LED headlights
Some 2013 Impreza models, especially higher trims or cars with optional lighting packages, may use HID headlamps or LED daytime running lights. In those cases, the low-beam bulbs are HID bulbs (commonly D2S or D3S) operated by a ballast, not a simple H11 halogen. LED systems use integrated modules rather than replaceable bulbs. If your vehicle has HID or LED headlights, consult the owner's manual or a Subaru dealer to identify the exact bulb type and replacement procedure.
How to confirm the exact bulb type for your car
To avoid buying the wrong bulb, check one of these quick methods:
- Inspect the bulb itself: remove the headlamp access panel and read the markings on the bulb (type code, wattage).
- Check the owner’s manual or window sticker for the correct bulb specification.
- Ask a Subaru dealer or a trusted indie shop with your VIN to confirm the exact bulb type for your trim and production date.
Many headlights on the same model year can differ by trim and market, so a quick verification saves a trip to the parts counter.
Summary
For most 2013 Subaru Impreza models with halogen headlights, plan to use H11 for the low beam, 9005 for the high beam, and H11 for fog lights. If your car has HID or LED headlights, the replacement bulbs and procedure will differ (D2S/D3S for HID, or integrated LED modules). Always verify with the owner's manual or dealer before purchasing replacements.
What bulbs does a Subaru Impreza use?
Subaru Impreza (2021) Bulb Size Chart
| Headlights (High Beam) | 9005 (HB3) |
|---|---|
| Side Marker Light (Rear) | T10 (194 168) |
| Turn Signal Light (Rear) | 7443 (7440) |
| Side Marker Light | T10 (194 168) |
| Tail Light | T10 (194 168) |
Are H11 and 9005 headlight bulbs the same?
A: H11 bulbs use lower wattage and are better suited for low beams. 9005 bulbs have higher wattage ratings and are mainly used as high-beam headlight bulbs.
What year to stay away from a Subaru Impreza?
Transmission Problems: Certain models of the Impreza, notably from 2012 to 2013 and in 2015, were prone to transmission failures. These problems ranged from gears shifting incorrectly to the car unexpectedly speeding up while in reverse or hesitating before lunging forward when the gas pedal was pressed.
What headlight bulb does a 2013 Subaru Impreza take?
2013 Subaru Impreza Bulb – Headlight. H11 12 Volt 55 Watt Halogen - 84920YA000 - Genuine Subaru Part.