If you’re replacing the starter on a 2015 Chevrolet Silverado, you’ll typically pay between about $250 and $650 total, depending on parts and labor choices. Doing the job yourself can reduce the cost to roughly $150–$300 for parts alone.
What goes into the price
Understanding the main cost drivers helps you estimate your bill more accurately.
- Part type and brand: remanufactured starters, new OEM (dealer), and aftermarket options all have different price points.
- Vehicle configuration: the Silverado’s engine (V6 or V8) and drivetrain layout can affect removal access and time, modestly influencing labor costs.
- Warranty and supplier: dealers often price higher but may offer longer warranties; independent shops and remanufacturers can be more cost-effective with shorter or different warranty terms.
Part choice and where you buy it are the strongest levers in the price range, with labor remaining the substantial variable depending on local rates.
Labor costs and time
Labor is the biggest variable in the final bill and varies by shop location and rate.
- Estimated labor time: roughly 1.5 to 3 hours, depending on access and whether additional work is needed.
- Labor rates: independent repair shops typically charge $80–$120 per hour; dealerships often bill $100–$180 per hour, and in high-cost regions rates can exceed $200 per hour.
In most cases, expect labor to account for about $120–$450 of the total, with higher-end shops and regions pushing toward the upper end.
Parts costs and options
Here are common starter options and typical price ranges for the Silverado.
- Remanufactured starter: about $120–$250, usually with a warranty and lower cost than a new OEM unit.
- New OEM starter: about $250–$450, typically the most reliable option with dealership-grade parts.
- Aftermarket starter: about $180–$350, varies by brand and warranty coverage.
Choosing between remanufactured, new OEM, or aftermarket hinges on your budget, reliability expectations, and whether a longer warranty is important to you.
DIY considerations
For the mechanically inclined, a do-it-yourself replacement can cut labor costs but requires proper tools and safety precautions.
- Time and effort: commonly 1.5–3 hours with basic hand tools and a jack/stands; ensure you disconnect the battery before starting.
- Risks and caveats: improper installation can damage the starter or flywheel; follow torque specs and consult a service manual if unsure.
DIY can significantly reduce total cost if you have the tools and skills, but weigh the risk of mistakes against potential savings.
Additional costs to consider
Some extra charges may appear on your bill depending on the situation.
- Diagnostics: a diagnostic fee if the issue isn’t confirmed prior to replacement.
- Towing: may apply if the vehicle can’t be started and needs a tow to a shop.
- Core charges and taxes: depending on parts supplier, a core charge may be added; local sales tax may apply.
These ancillary costs can add tens to a couple hundred dollars to the final total, so ask for a full quote that itemizes parts, labor, and fees.
Summary
For a 2015 Silverado, expect a total replacement cost range of roughly $250 to $650 in a shop, with DIY parts-only costs around $150 to $300. The exact price depends on your starter choice (remanufactured vs new OEM vs aftermarket), labor rates in your area, and whether the service is performed by a dealer or an independent shop. Always obtain a written, itemized quote before proceeding.
Note: Prices vary by region, model specifics (V6 vs V8), and supplier promotions. Check local auto shops for current, location-specific quotes to get the most accurate estimate.
Bottom line: plan for a cost in the low-to-mid hundreds for a typical shop replacement, with potential savings if you opt for a DIY approach and select a cost-conscious starter option. The key is to balance cost, warranty, and reliability to fit your needs.
Summary: A practical approach is to compare remanufactured versus new OEM starters, get multiple shop quotes, and decide whether you want dealership-level assurance or independent-shop savings. Always confirm the included warranty and any core charges before purchase.
How much does it cost to replace a starter on a Chevy Silverado 1500?
between $513 and $773
The average cost for a Chevrolet Silverado 1500 Starter Replacement is between $513 and $773. Labor costs are estimated between $200 and $293 while parts are priced between $313 and $479. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
Is it worth fixing a starter?
They typically last between 100,000 to 150,000 miles, but when they fail, replacing them is a non-negotiable to get your vehicle running again. A remanufactured starter is an excellent option for many car owners looking for a balance of cost and reliability. Remanufacturing is not the same as rebuilding.
How long does it usually take to change a starter in a Chevy Silverado?
A failed starter stands in the way of using your vehicle at all, and once it's beginning to go, a replacement is the best way to restore its function. It can take an hour or more to replace the starter, and along with the average parts range of $100 to $400, it's going to take from one hour and up to install it.
How much is a starter for a 2015 Chevy Silverado 1500?
The range of prices of Starters for the 2015 Chevrolet Silverado 1500 goes from $239.99 up to $349.99 for the most premium parts.