The standard headlight setup for the 2010 Subaru Outback is H11 for low beams and 9005 for high beams.
This article explains that configuration, notes possible variations by market or trim, and provides guidance on how to verify the exact bulb type for your vehicle.
Standard headlight bulb types
Below are the bulbs used in the factory headlight configuration for most 2010 Outback models. These reflect the typical US-spec setup from Subaru.
- Low beam: H11 halogen bulbs
- High beam: 9005 (HB3) halogen bulbs
These are the common factory bulbs for US-spec 2010 Outbacks. Always verify with the owner's manual or the bulb label inside the headlamp assembly to be sure.
Variations by trim or market
While the standard configuration covers the majority of vehicles, there are occasional variations by trim level or regional market, and aftermarket changes can alter the bulb type entirely.
- Most US-market 2010 Outbacks use H11 low beams and 9005 high beams.
- Factory HID or LED upgrades are not typical for 2010 models; if installed, they use different bulb types (e.g., D-series bulbs) and ballast systems, and they are not part of the stock configuration.
- Fog lights, when present, are commonly H11 on many trims, though some regional specifications or aftermarket setups may use alternatives such as H16.
In any case, confirm the exact configuration for your particular trim and market by consulting the owner’s manual, the headlamp housing label, or a Subaru dealer.
How to verify the exact bulb type for your car
To be certain you have the correct bulbs, use these verification steps before purchasing replacements.
- Check the owner’s manual or Subaru’s official support page for the specific bulb types by year and trim.
- Inspect the bulb itself or the label on the headlamp housing, which often lists the bulb type (H11, 9005, etc.).
- If you’re unsure after inspection, contact a Subaru dealer or use a VIN-based parts lookup to confirm factory specifications.
Correctly identifying the bulb type helps ensure proper fit, performance, and safety when replacing headlight bulbs.
Summary
For a 2010 Subaru Outback, the typical headlight bulbs are H11 for low beams and 9005 for high beams, with fog lights commonly using H11 on many trims. Always verify exact bulb types for your specific vehicle by checking the owner’s manual, the bulb label, or a Subaru dealer, especially if your car has a non-standard trim or aftermarket upgrades.