The 2010 Honda Fit most commonly uses H11 bulbs for the low-beam headlights and 9005 bulbs for the high-beam headlights. If your model has fog lights, they are usually H11 as well, though some markets or trims may use a different bulb. Always verify with your owner’s manual or by inspecting the bulb label on the vehicle.
Typical bulb types for the 2010 Honda Fit
The following configurations cover the most common setups you’ll encounter on this model. Use this as a quick reference, but confirm on your specific car.
- Low beam: H11
- High beam: 9005
- Fog lights (if equipped): H11, with some markets/trims using H16
Note that bulb types can vary by market and trim level. If in doubt, check the owner's manual or the bulb label on the headlight assembly.
How to verify the exact bulb for your car
To ensure you purchase the correct bulb, follow these steps to confirm your car’s exact bulb type for your trim and region.
- Consult the owner's manual or the information sticker (often found on the driver’s door jamb) for the recommended bulb type.
- Carefully remove the headlight bulb socket and inspect the base for any part numbers or markings that indicate the bulb type.
- If you can't locate clear markings, compare the current bulb with replacement options from Honda’s parts catalog or a reputable parts retailer to find a match.
Confirming the exact specification helps prevent buying the wrong bulb and ensures proper fit and performance.
Replacement tips and best practices
When replacing headlight bulbs, take care to handle bulbs by the base rather than the glass to avoid oils that can shorten bulb life. After installation, test the lights before driving to ensure proper aim and operation.
- Avoid touching the glass of the new bulb; use gloves or a clean cloth.
- Ensure the power is off and, if possible, disconnect the battery before working under the hood.
- Verify the headlight aim after replacement and adjust if necessary for proper illumination without blinding other drivers.
These practices help maximize bulb life and maintain safe nighttime visibility.
Summary
For a 2010 Honda Fit, the typical configuration is H11 for low beams and 9005 for high beams, with fog lights usually H11 (though some markets use H16). Since configurations can vary by market and trim, always check the owner’s manual or bulb labels on your car to confirm the exact bulb type before purchasing or replacing.