The Mitsubishi Outlander’s refrigerant type depends on the model year: older models typically use R-134a, while newer models use R-1234yf. Always verify with your vehicle’s label or owner’s manual before servicing.
Refrigerant types by model year
The following is a straightforward guide to the two most common refrigerants used across Outlander generations. Regional variations can apply, so always confirm against the specific vehicle.
- Older Outlander models (roughly pre-2017) typically use R-134a refrigerant.
- Newer Outlander models (model year 2017 and later, including current generations) use R-1234yf refrigerant.
Because refrigerant types can vary by market and exact model, always confirm via the under-hood service label or the owner’s manual for your specific vehicle.
How to verify the refrigerant in your Outlander
If you’re planning a recharge or service, use these steps to confirm the correct refrigerant for your car.
- Open the hood and locate the service label on the radiator support or nearby. The label lists the refrigerant type (R-134a or R-1234yf) and the required oil.
- Consult the owner’s manual or service manual for your exact model year and market for the approved refrigerant specification.
- If the label is missing or unreadable, contact a Mitsubishi dealer or a licensed HVAC technician to confirm the correct refrigerant for your VIN.
- During service, ensure the technician uses the proper recovery equipment and refrigerant type; mixing 134a and 1234yf can damage the system.
Having the right refrigerant and oil type is essential for proper performance and longevity of the AC system.
Safety and service notes
R-1234yf is mildly flammable and requires proper handling with appropriate equipment. Do not attempt to service the refrigerant yourself unless you are trained and equipped for automotive HVAC work. Always use a certified shop with proper recovery and recycling procedures.
Summary
In short, the Outlander’s refrigerant type depends on year: older models typically use R-134a, while newer models use R-1234yf. To avoid errors during maintenance, verify the refrigerant type on the vehicle’s label or in the owner’s manual.
Why is my Mitsubishi Outlander AC not cooling?
The most common reasons a Mitsubishi Outlander AC isn't working are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.
Which refrigerant is used in Mitsubishi AC?
R32 refrigerant
R32 refrigerant
Given its very good thermodynamic properties and low GWP, R32 is now used in air conditioning and heat pump systems with relatively small refrigerant quantities. Benefits: Meets requirements of F-gas Regulation. High system efficiency.
What is the most common problem with Mitsubishi?
Here are some of the most common problems reported by Mitsubishi owners: Transmission Issues: Many Mitsubishi models, particularly those with CVT (Continuously Variable Transmission), are prone to transmission problems. Common complaints include shuddering, hesitation, and even transmission failure.
Can I refill my car AC refrigerant myself?
It used to be that only professionals could recharge an AC system, but there are now kits available to do it on your own. What you'll need is: AC recharge kit with refrigerant (R-134a or R-1234yf, depending on your vehicle) Safety gloves and goggles.