The typical US-market 2006 Honda CR-V uses 9006 low-beam bulbs and 9005 high-beam bulbs for the headlights, with fog lights commonly using H11. Bulb types can vary by region and trim, so it’s best to verify with the owner’s manual or by inspecting the bulb in your specific vehicle.
In this guide, you’ll find the most common bulb configurations for the 2006 CR-V, along with notes on regional differences and practical tips for replacement. While US-spec models generally follow the 9006/9005 pattern, international trims may differ, so always cross-check your exact car’s specifications.
Headlight bulbs for the 2006 CR‑V
The following paragraph explains the typical headlight setup you’re likely to encounter on a 2006 CR‑V. This is intended as a baseline, with recognition that variations exist by market and trim.
- Low beam: 9006 (HB4)
- High beam: 9005 (HB3)
Note: Some international or early trims may have used a single H4 bulb (dual filament) or different codes. Always verify by checking the existing bulb or the owner’s manual for your exact vehicle.
Fog lights (if equipped)
If your CR‑V is equipped with factory fog lamps, the bulbs are commonly H11 in many markets; however, some regions or trims have used alternate bulb types such as H8 or H16.
- Fog lights: typically H11 (most US-specs)
- Alternative/variations: H8 or H16 may appear on some trims or markets
Because fog lamp bulb types can vary by region and trim, confirm with the owner’s manual or by inspecting the bulb in your vehicle before purchasing replacements.
Replacement and verification tips
Before buying replacements, use these steps to ensure you select the correct bulbs for your exact car configuration.
- Check the owner’s manual or the specifications on the bulb itself for the exact part numbers.
- Inspect the bulbs in your headlight housing to confirm the numbers (sometimes printed on the base of the bulb).
- Purchase the same type and wattage to maintain proper beam pattern and safety.
- Consider replacing both headlight bulbs in pairs to ensure even brightness and color.
- Handle bulbs with clean gloves or a cloth to avoid transferring oils to the glass, which can shorten bulb life.
- After installation, test the lights and, if needed, have the headlight aim checked and adjusted.
Following these steps helps ensure reliable performance and avoids common replacement mistakes, especially when dealing with regional or trim variations.
Summary
For most 2006 Honda CR-Vs in the United States, the headlights use 9006 low-beam and 9005 high-beam bulbs, with fog lamps typically using H11. Always verify with the owner’s manual or by inspecting the current bulbs because regional and trim differences can apply. When replacing, consider replacing both headlamps at once, handle bulbs carefully, and ensure proper aim after installation. This approach keeps lighting safe and consistent across the vehicle’s lifespan.