For most Honda CR-V models, lug nuts are tightened to 80 ft-lbs (108 Nm). This standard helps ensure wheels are securely mounted without overstressing studs. Always confirm the exact specification for your year, trim, and wheel type in the owner's manual or service manual.
The following article explains the typical spec, how to verify it for your specific vehicle, and best practices for safe wheel installation and maintenance.
Standard torque setting across CR-V generations
Note: The 80 ft-lbs (108 Nm) specification covers a wide range of CR-V generations and wheel types, but there can be exceptions based on year or aftermarket wheels. Use the manual for confirmation.
- 80 ft-lbs (108 Nm) is the typical torque for lug nuts on most CR-V wheels.
- Always tighten lug nuts in a star/crisscross pattern to ensure even seating.
- After mounting a wheel, re-check torque after driving 50–100 miles (80–160 km) to ensure nothing has loosened.
In practice, the 80 ft-lbs specification covers the majority of CR-V configurations, including steel and most alloy wheels. If you have aftermarket wheels, oversized studs, or a special edition, verify with the manual or dealer.
How to verify the torque for your exact model
Because model years and wheel configurations differ, follow these steps to confirm the correct setting for your CR-V and ensure a safe installation.
- Consult the owner's manual or the service manual for your exact year and wheel type.
- Use a calibrated torque wrench that reads in ft-lbs or Nm.
- Loosen and re-torque in a star pattern to 80 ft-lbs (108 Nm) if your manual specifies that value; if not, use the exact value listed.
- After tightening to spec, check again after a short drive or 50–100 miles to ensure nothing has loosened.
- Record the specification in a safe place for future reference.
Following the manufacturer's guidance helps prevent wheel detachment or brake rotor distortion and ensures safe driving conditions.
Crucial notes by model year or wheel type
While 80 ft-lbs is standard for many CR-Vs, certain generations or wheel setups may use a slightly different spec. If your vehicle has aftermarket wheels, aluminum wheels with a different hub design, or if the owner's manual lists a different value, use that value exactly and consult a professional if unsure.
In summary, the lug nuts on most Honda CR-V models are torqued to about 80 ft-lbs (108 Nm), tightened in a star pattern, and re-checked after driving a short distance. Always verify with your exact year and wheel configuration in the owner's manual for precise specifications.