The 2015 Chrysler 200 S uses a standard 12-volt automotive battery. The most common replacement sizes for this model are Group Size 58 (also listed as H6) or Group Size 48, but you should verify the exact size from your current battery label or by checking the vehicle’s VIN with a dealer or parts retailer.
Understanding the battery requirement
To ensure you purchase the correct replacement, use these guidelines to confirm the right battery size for your car.
- Check the label on your current battery for the group size (for example, “Group 58” or “H6”).
- Consult the owner's manual or the battery installation guide for the recommended group size for your specific trim and engine.
- Ask a dealer or auto parts store to pull OEM specs using your vehicle VIN, which guarantees the exact size for your car.
- Consider your climate and electrical loads (heated seats, navigation, start-stop features) when choosing a replacement.
By confirming the group size and considering your vehicle’s electrical needs, you’ll ensure compatibility and reliable starting performance.
Common group sizes for this model
In practice, several group sizes appear on market builds of the 2015 Chrysler 200 S. The two sizes most often cited are listed below.
- Group Size 58 (H6): A very common fit for many 200 S configurations and the V6/longer-life electrical load setups.
- Group Size 48: Another size you may encounter depending on market or trim; verify before buying.
Refer to your vehicle’s labeling or VIN-based OEM guidance to confirm the exact size before purchasing a replacement.
Replacing the battery: practical guidance
When selecting a replacement, follow these practical guidelines to ensure proper fit and performance.
- Choose a 12-volt automotive battery. Standard flooded lead-acid batteries are common, unless your car requires an AGM type.
- Match the group size to your current battery and the OEM specifications for your exact build.
- Check the cold-cranking amps (CCA) and overall capacity; aim for a unit that meets or exceeds the OEM rating for reliable starting, especially in cold weather.
- If your vehicle has start-stop technology or you want longer service life, consider an AGM battery option validated for your model.
- Pay attention to warranty terms and brand reliability when choosing a replacement.
Following these guidelines helps ensure you select a battery that fits correctly and performs reliably in daily use.
Battery maintenance tips
Routine care can extend battery life and reliability. Keep terminals clean and tight, apply a light coating of dielectric grease to prevent corrosion, and inspect for signs of wear or physical damage. If you notice slow engine starts or intermittent electrical issues, have the battery and charging system tested by a professional.
Summary
For a 2015 Chrysler 200 S, a 12-volt battery is required, with common replacement group sizes being 58 (H6) or 48 depending on the build. Always verify the exact size using the current battery label or your VIN-based OEM reference, and consider climate, electrical loads, and whether an AGM option is appropriate. Proper confirmation and installation ensure reliable starts and long-term performance.
What type of battery does a 2015 Chrysler 200 take?
Super Start Platinum AGM Top Post Battery Group Size 48 H6 760 CCA 120 Minute RC - 48PLT.
How much is a battery for a Chrysler 200?
The average cost for a Chrysler 200 Battery Replacement is between $714 and $759. Labor costs are estimated between $98 and $143 while parts are typically priced around $616.
What batteries does Chrysler use?
DieHard Platinum AGM – Battery : H7 Group Size, 850 CCA, 1000 CA, 140 Minute Reserve Capacity (Part No. H7-AGM) DieHard Platinum AGM (Absorbent Glass Mat) batteries are specifically designed for today's power hungry vehicles.
What is the correct size of my car battery?
While you could grab a ruler and attempt to measure the exact width and height of your current car battery, pop the hood and simply look for "Group Size" printed on the label of the battery or check your owner's manual.