The typical rear tire size for most Honda Click scooters is 90/90-12 (tubeless).
Across markets and model years, the Click lineup can vary slightly. This article explains the standard size, what the code means, and how to verify the exact specification for your specific bike.
Tire size basics
Understanding the tire size notation helps you confirm the correct replacement. The rear tire on many Honda Click models uses a 12-inch wheel, which constrains available sizes to common 12-inch-format codes such as 90/90-12.
Interpreting the 90/90-12 code
The first number (90) is the tire width in millimeters. The second number (90) is the aspect ratio, representing the height of the tire’s sidewall as a percentage of its width. The final number (12) indicates the wheel diameter in inches. So 90/90-12 describes a 90 mm wide tire with a 90% aspect ratio designed for a 12-inch wheel.
How to confirm the exact size for your Honda Click
To ensure you have the right tires for your model/year, verify with the sidewall, manual, or official specs. The following checklist helps you confirm the correct rear tire size on your bike.
Before you begin the checklist, reference a reliable source for your specific model/year to avoid mis-sizing.
- Look at the tire sidewall to read the size code, which usually appears as something like 90/90-12, often followed by a load/speed rating (for example 54J).
- Consult your Honda owner’s manual or an up-to-date official spec sheet for your exact model and year to confirm the recommended tire size.
- If you replace the tire, use the same size and ensure the replacement is compatible with your wheel/tube setup (tubeless vs. tube) as required by your rim.
In most Honda Click models, the rear tire size is 90/90-12, but always verify for your specific year and market.
Summary
For the Honda Click lineup, the rear tire is typically sized 90/90-12. Always check the tire sidewall or your owner’s manual for your exact model and year to ensure accuracy before purchasing or replacing a tire.