The part number for the oil filter on a 2007 Hummer H2 is ACDelco PF52. This is the OEM filter used on the 6.0L V8 engine in that model year, and many aftermarket PF52 filters will fit as well. When buying, verify compatibility with your VIN or by checking the filter you removed.
Context: engine and filter compatibility
The 2007 Hummer H2 uses a 6.0-liter V8 engine that GM shared with other trucks from that era. The vehicle uses a spin-on oil filter, and the factory-recommended filter is the ACDelco PF52. If you shop aftermarket, PF52 is a common cross-reference, but always confirm fitment for your exact vehicle configuration.
How to confirm you have the correct filter
To ensure you’re selecting the right part, look for the PF52 designation on the replacement filter. If you’ve changed the filter before, you can use your previous purchase as a reference. When buying online or in a store, you can enter the vehicle’s VIN into the retailer’s lookup tool or consult the manufacturer’s cross-reference to confirm PF52 compatibility.
Replacement basics and tips
When replacing the oil filter, prepare with fresh oil, a drain pan, and basic hand tools. Remove the old filter, clean the mounting surface, install the new PF52 by hand until snug, then tighten according to the manufacturer’s instructions. Refill the engine with the recommended oil capacity, start the engine, check for leaks, and recheck the oil level after a short run.
Aftermarket options and considerations
Many reputable aftermarket brands offer filters that cross-reference to PF52. These can provide cost savings or broader availability, but ensure the substitute matches the PF52’s thread type, gasket size, and overall compatibility with the H2’s engine. Always dispose of used oil and filters properly.
Summary
For a 2007 Hummer H2, the official oil filter part number is ACDelco PF52. Use PF52 as your primary reference, and consider reputable PF52 cross-reference options if you’re choosing an aftermarket filter, confirming compatibility with your vehicle’s VIN.