The oil filter part number for a 2017 Honda Foreman 500 is 15410-HP5-000.
This article explains the official part number, how to verify it for your machine, and guidance on where to buy and how to replace the filter. The 2017 Foreman 500 (TRX500FA) uses a standard spin-on oil filter used across many Honda four-stroke models, but regional catalogs can list variations. Always confirm with a Honda dealer or the official Powersports parts catalog to ensure you have the correct number for your exact country and model.
Part number details
The official Honda listing for the 2017 TRX500FA Foreman shows the oil filter as 15410-HP5-000. This is the direct OEM replacement number recommended by Honda for the Foreman 500 and is commonly used in North American catalogs. If you shop outside North America, verify the exact regional catalog entry, as minor cross-references can appear in local listings.
When purchasing, prefer Honda Genuine Parts for compatibility, and double-check the model code (TRX500FA or equivalent) and year to avoid ordering the wrong filter.
Where to buy and how to verify
Before purchasing, consult these sources to verify the correct filter for your bike:
- Honda Powersports official parts catalog for your country or region.
- Authorized Honda dealers, providing your ATV’s VIN and model code to confirm the correct part number.
- Reputable aftermarket retailers that clearly specify compatibility with the 2017 Foreman 500 (TRX500FA) and list the OEM-equivalent filter.
Verifying with a dealer or the official catalog is especially important if your Foreman was imported or produced for a different market, as part numbers can vary by region even for the same model year.
Replacing the oil filter
If you’re planning to replace the filter, follow these general steps to complete the job safely and effectively. Always refer to the owner’s manual for torque specs and any model-specific instructions.
- Warm up the engine briefly, then turn it off and place the ATV on a level surface. Engage the parking brake.
- Drain the engine oil by removing the drain plug and allowing the oil to completely flow into a container.
- Remove the old oil filter using an appropriate filter wrench or tool designed for spin-on filters.
- Install the new oil filter, ensuring it seats fully and is tightened to the manufacturer’s recommended torque (usually specified in the service manual).
- Replace the drain plug with a new washer if required, and refill the engine with the correct amount and grade of oil.
- Run the engine for a few minutes, check for leaks around the filter and drain plug, then recheck the oil level and top off if necessary.
Post-replacement, dispose of used oil and the old filter properly according to local regulations. Keep receipts and notes for future maintenance records.
Summary
The 2017 Honda Foreman 500 uses OEM oil filter part number 15410-HP5-000. Verify this part number with Honda’s official catalogs or an authorized dealer for your specific region, especially if the machine was imported. When replacing the filter, follow standard maintenance steps and torque specifications from the service manual to ensure proper fit and engine health.