The answer depends on the engine: the 2014 Accord’s four-cylinder uses part number 15400-PLM-A02, while the V6 uses 15400-RAA-A02. Always verify with your VIN or the owner's manual to be sure.
Two engines, two filters
In 2014, the Honda Accord was offered with a 2.4-liter four-cylinder or a 3.5-liter V6. Each engine uses a different oil filter cartridge, so the part number differs accordingly.
2.4-liter inline-4 engine
For the 2.4L engine commonly found in the 2014 Accord, the OEM oil filter is typically listed as:
- 15400-PLM-A02
Selecting the correct filter by engine is essential to ensure proper sealing and performance, as even small mismatches can affect oil flow and filtering.
3.5-liter V6 engine
For the 3.5L V6 model, Honda’s official filter number is typically:
- 15400-RAA-A02
Again, verify this against your specific vehicle using VIN or the parts catalog, since there can be minor revisions across model years and trim levels.
How to verify your exact part
To avoid mistakes, confirm the filter part number with one of these methods:
- Check the underside of the hood or engine bay sticker for maintenance part numbers.
- Consult your owner’s manual’s "Maintenance and service" section for the recommended filter and part number.
- Use your Honda VIN on the official parts lookup (dealer or Honda Parts websites) to pull the exact filter for your vehicle.
Relying on the VIN ensures you get the correct OEM or high-quality aftermarket filter, especially if revisions were made during the model year.
Summary
In short, the 2014 Honda Accord uses different oil filter numbers based on engine: 15400-PLM-A02 for the 2.4L four-cylinder and 15400-RAA-A02 for the 3.5L V6. Always double-check with VIN-verified sources before purchasing.