The typical OEM oil filter number for a 2012 Honda Fit is 15400-PLM-A01, with 15400-PLM-A02 as a regional variant. Always verify the exact part using your VIN or the vehicle’s documentation to ensure correct fitment.
Common OEM part numbers you might encounter
These numbers cover the most common configurations for the 2012 Fit’s 1.5-liter engine across markets. To be certain, consult the official parts catalog or your dealer using your VIN.
Regional variations
- 15400-PLM-A01 — Widely used as the standard OEM oil filter for many 2012 Fit models in North America and similar markets.
- 15400-PLM-A02 — A regional revision used in some markets or production runs; verify compatibility with your exact vehicle.
Note: There can be additional cross-reference numbers depending on production date and market. The safest approach is to reference the official Honda parts catalog for your VIN or ask a dealer parts desk.
How to verify and replace
To ensure you have the correct filter and perform a proper replacement, follow these steps.
- Check the current filter or the owner's manual for the part number specified for your VIN.
- Use your VIN to pull the exact Honda OEM filter in the official parts catalog or through a dealer/retailer.
- When replacing, lubricate the new filter gasket with a small amount of clean oil, screw it in by hand until snug, then tighten according to the service manual. Replace the engine oil at the recommended interval.
Adhering to these steps helps ensure correct fitment and long-term engine lubrication.
Summary
For a 2012 Honda Fit, the most common oil filter number is 15400-PLM-A01, with 15400-PLM-A02 as a possible regional variation. Always verify with your VIN or official parts catalog to confirm the exact part number before purchasing or installing. Regular oil and filter changes support engine longevity and performance.