The common OEM oil filter for the 2011 Honda Odyssey is 15400-PLM-A01. Some units produced around the year’s start or end may use 15400-PLM-A02. Always verify with your VIN or the owner's manual.
In this article we explain which filter numbers typically apply to the 2011 Odyssey, how to confirm the exact part for your vehicle, and where to source the correct filter.
Common oil filter part numbers for the 2011 Odyssey
The following are the two most frequently used genuine Honda oil filter part numbers for the 3.5L V6 that powers the 2011 Odyssey. Use the VIN to confirm if your vehicle uses a different batch.
- 15400-PLM-A01 — Honda Genuine Oil Filter for most 2011 Odyssey models with the 3.5L V6 (J35A).
- 15400-PLM-A02 — Alternative Honda Genuine oil filter used on some early/late production runs; verify with VIN.
Concluding note: When replacing the oil filter, ensure you also replace the seal if included and follow the recommended oil-change interval from the owner’s manual. If in doubt, consult a dealer or a qualified mechanic with your VIN.
How to confirm the exact part for your vehicle
To ensure you have the correct filter, use one of these verification methods:
- Check the service manual or HondaParts diagrams for your specific VIN; the diagram shows the exact filter model used in your car.
- Ask a Honda dealer with your VIN—they can look up the exact part number in the factory database.
- Inspect the current filter or housing label; some cartridges have the part number printed on the filter itself or on the housing’s documentation.
Having the precise part number minimizes the risk of fitment issues and ensures proper filtration during oil changes.
Additional considerations
Note that many aftermarket filters are compatible, but quality varies. If you opt for an aftermarket filter, choose a reputable brand that lists compatibility with the 2011 Odyssey’s 3.5L V6 and the same thread size and seal design as the OEM part.
Summary
For the 2011 Honda Odyssey, the most common OEM oil filter number is 15400-PLM-A01, with 15400-PLM-A02 used in some production batches. Always verify the exact part using your VIN or dealer resources to ensure a correct fit and seal during an oil change. This helps maintain engine health and filtration performance over time.