The 2016 Dodge Journey with the 3.6-liter V6 uses SAE 5W-20 synthetic motor oil that meets Chrysler MS-6395 specifications.
Oil specifications for the 3.6L Pentastar engine
Understanding the exact oil requirements helps ensure proper protection and performance for the engine over time. The information below covers the core specifications you should look for when purchasing oil.
Key requirements for the correct oil are summarized here:
- Viscosity: 5W-20
- Oil type: Synthetic motor oil (full synthetic or synthetic blend) is preferred
- Certification/approval: API SN or newer; ILSAC GF-5; Chrysler MS-6395 approval for Mopar specification
- Capacity and changes: typical oil capacity is about 6 quarts with filter; replace the oil filter during every change
When in doubt, verify the exact specification printed on the vehicle’s oil fill cap and consult the owner manual or a dealership service advisor.
Climate considerations and maintenance tips
While 5W-20 is the standard, follow local guidelines and severe service schedules. Always use a quality synthetic oil and change at the recommended intervals (usually every 5,000–7,500 miles under normal driving conditions, or sooner if you have severe service). Use the vehicle's oil change sticker or owner's manual to confirm the service intervals for your region.
Summary
For the 2016 Dodge Journey equipped with the 3.6L V6, the recommended oil is SAE 5W-20 synthetic (or synthetic blend) that meets API SN or newer and Chrysler MS-6395 approval. Check the cap and owner’s manual for the exact specification and follow the maintenance schedule to keep the engine running smoothly.