The standard oil filter for most 2010 Honda Fit models with the 1.5-liter engine is Honda part number 15208-PT3-004.
Exact filter numbers can vary by engine variant and regional market. Always verify the correct part using your vehicle’s VIN, the owner's manual, or a trusted parts catalog.
Official oil filter part number
The primary OEM option used on many 2010 Fits with the 1.5L engine is listed below.
- Honda OEM oil filter: 15208-PT3-004
Regional differences or different submodels may apply. When in doubt, confirm the exact part with a Honda dealer or parts retailer using your VIN.
Confirming the exact part for your vehicle
The following steps help ensure you purchase the correct filter for your specific car configuration.
- Check your owner's or service manual for the recommended oil filter part number corresponding to your engine code (L15A1/L15A2). If it lists 15208-PT3-004, you’re aligned with the typical 1.5L Fit.
- Examine the current filter for any printed part numbers or manufacturer markings, noting that some filters do not display the OEM number clearly.
- Use Honda's official parts lookup or a reputable parts retailer and enter your VIN to retrieve the exact filter for your vehicle.
- Contact a Honda parts advisor at a local dealership with your VIN to confirm the correct filter before purchase.
Following these steps helps ensure you get the right filter, accounting for regional or engine-specific variations.
Why the right filter matters
Using the correct oil filter supports proper filtration, sealing, and oil flow. An ill-fitting or incorrect filter can leak, fail to seal properly, or restrict oil flow, potentially causing engine wear over time. Always pair the filter with the recommended oil grade and maintenance interval.
Summary: For the 2010 Honda Fit with the 1.5L engine, the typical OEM oil filter number is 15208-PT3-004, but always verify via VIN-based lookup or dealer confirmation due to regional or engine-specific variations.