The 2017 Hyundai Santa Fe Sport uses a standard oil filter sized for the engine installed (2.4L inline-4 or 2.0L turbo). The exact size and part number depend on the specific engine variant and production date, so it's best to verify with your VIN or the owner's manual.
The Santa Fe Sport in 2017 offered two engine options, which influences the filter size and type. Understanding which engine your vehicle has will help you source the correct filter quickly and avoid ordering the wrong part.
Engine options and filter formats
The vehicle could be equipped with either a 2.4L inline-4 engine or a 2.0L turbo engine. Each variant uses a replacement filter sized to its design, though many Hyundai filters in this era use a common thread standard. Always confirm the exact part using your VIN to avoid mismatches.
- 2.4L inline-4 engine: typically uses a standard spin-on oil filter that matches common Hyundai sizing conventions. Part numbers vary by production date and region, so verification is recommended.
- 2.0L turbo engine: also uses a compatible oil filter sized for Hyundai’s turbo application, with part numbers that differ from the 2.4L but follow the same threading standard. Verify with VIN to ensure correct fit.
To ensure you have the correct size, check the existing filter, consult the vehicle’s VIN-based parts lookup, or ask a dealer or trusted parts retailer to confirm the exact size and part number for your specific vehicle configuration.
How to identify the correct filter size for your Santa Fe Sport
Before purchasing, use these steps to confirm the exact filter size and part number for your vehicle:
- Locate your engine code (2.4L or 2.0L turbo) from the under-hood label or owner’s manual to determine the engine variant.
- Check the old filter: spin-on filters are round and threaded onto a base with a visible canister; cartridge filters sit inside a housing with a replaceable cartridge.
- Use your VIN in an official parts database or dealership portal to pull the precise oil filter part number and size for your exact vehicle.
- Note the common thread size for Hyundai spin-on filters (often 3/4-16 UNF, with a diameter roughly around 73–75 mm); if you have a cartridge type, follow the housing and cartridge dimensions specified for your model.
By following these checks, you can reliably identify the correct filter size and part for your Santa Fe Sport. When in doubt, consult a Hyundai dealer or a trusted parts retailer with your VIN.
Summary
In short, the 2017 Hyundai Santa Fe Sport uses a standard oil filter size that varies by engine: 2.4L or 2.0L turbo. The exact size and part number should be confirmed via VIN or the owner’s manual, but most spin-on filters in this era use a common threading standard (about 3/4-16 UNF) and a compact overall size. Always verify with a reliable parts source to ensure a correct fit for your specific vehicle configuration.
What is the part number of the oil filter on a Hyundai?
26300-35505
Oil Filter - Hyundai (26300-35505)
It's compatible with many Hyundai cars and SUVs from between 1986 and 2021.
What type of oil does a 2017 Hyundai Santa Fe Sport use?
SAE 5W-30
Oil Grade: SM
| Viscosity: | 10W-30 (Above -18°C) 5W-30, 5W-20 (All TEMPS) - SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 5.1 quarts (with filter). After refill check oil level. |
| Torque: | 29 ft/lbs (Oil Drain Plug) Install a new washer on the drain bolt. Only use an OE drain plug. |
What size is the oil filter wrench on a Hyundai Santa Fe?
88 mm x 15
88 mm x 15 Flute Oil Filter Cap Wrench for Hyundai in Black.
What type of oil filter for 2017 Hyundai Santa Fe?
FRAM Titanium – Cartridge Oil Filter: Ideal For Synthetic Oil Protection to 20,000 mile (Part No. FS10855)