The typical OEM oil filter part number for a 2000 Honda Accord is 15410-PLM-A01.
What the number means for your Accord
In 2000, the Honda Accord offered two common engines in North America—the 2.3-liter four-cylinder and the 3.0-liter V6. For most of these models, Honda used the same style oil filter and the part number 15410-PLM-A01 is commonly listed as the replacement filter. Depending on regional production variations or specific vehicle configurations, there can be minor differences, so it’s prudent to confirm using your VIN or by inspecting the current filter.
To help ensure you get the right filter for your car, consider the following steps:
- Inspect the existing filter for its stamped part number and match that exactly when you shop for a replacement.
- Use your vehicle’s VIN in a reputable parts catalog or dealer lookup to pull the precise Honda part number for your engine configuration.
- Check your owner's manual or service manual for the recommended filter specification and part number.
- When in doubt, ask a parts professional with your engine code and year on hand to verify the correct filter.
Using the correct filter protects engine oil circulation and filtration, helping to maintain engine longevity and performance.
aftermarket options and cross-compatibility
If you prefer aftermarket oil filters, many brands list compatibility with the Honda 15410-PLM-A01 specification. When shopping, look for filters that explicitly state compatibility with 2000 Honda Accord 2.3L or 3.0L engines and confirm the thread size and gasket diameter match your vehicle.
- Bosch
- Denso
- Purolator
- Mobil 1
- Wix
- Fram
Always verify the exact model number on the packaging to ensure it matches the Honda specification for your car. If your Accord has a regional variant or a production change, a differently numbered filter might still be correct for your engine.
Summary
The oil filter number most commonly used for a 2000 Honda Accord is 15410-PLM-A01. To be certain, verify using the car’s VIN, the existing filter, or official Honda parts catalogs, and consider reputable aftermarket options that specify compatibility with the 15410-PLM-A01 standard. This helps ensure the correct fit, seal, and filtration for both the 2.3L inline-four and the 3.0L V6 configurations typical of that model year.
What oil filter does a 2000 Honda Accord take?
This OEM Honda oil filter, part number 15400-PLM-A02, fits select Honda vehicles from model years 2000 all the way to 2021.
What oil filter does the Honda Accord take?
15400-PLM-A02) Genuine Honda original equipment oil filter for your Honda vehicle. Engineered and specified by Honda, this is the same filter as that which would be installed by your dealer.
What is the part number of the Honda oil filter?
15400-PLM-A02
Genuine Honda Oil Filter - 15400-PLM-A02.
What is the oil filter number on a Honda s2000?
15400-PCX-306
The 15400-PCX-306 is an OEM Honda oil filter. This filter is responsible for collecting impurities and other debris that may accumulate in the motor oil as it lubricates the engine parts.