There isn’t a single universal belt part number for every 2010 CR-V; the exact number depends on the engine code and equipment. In practice, the 2010 CR-V with the 2.4-liter engine uses a single serpentine belt around roughly 1010 millimeters in length, and aftermarket vendors commonly list a 7PK1010 belt as a fit reference. Always verify with your vehicle’s VIN and the belt-routing diagram under the hood.
Understanding the belt on the 2010 CR-V
The serpentine belt drives several accessories such as the alternator, power steering pump, and A/C compressor. The configuration can vary slightly by trim and production batch, which is why the official part number is not universal across all 2010 CR-Vs.
To minimize the risk of ordering the wrong belt, use the hood diagram that shows belt routing and check the exact engine code on your vehicle before purchasing.
How to identify the exact part number for your CR-V
Use these steps to pinpoint the correct serpentine belt for your car:
- Look at the belt currently installed and read any numbers printed on it; this can be the quickest cross-reference.
- Note your vehicle’s engine code and model year from the VIN or owner’s manual.
- Consult an official Honda parts catalog or a reputable retailer’s site using your VIN to pull the correct serpentine belt part number.
- Cross-check the belt by rib count (often 6 or 7 ribs) and length (around 1010 mm) with the recommended aftermarket belt (e.g., Gates/Dayco/Continental).
Following these steps helps ensure you obtain the precise belt your CR-V requires for optimal fit and performance.
Common aftermarket cross-reference options
Several major brands publish cross-references for the 2010 CR-V’s serpentine belt. Below are typical fit references you may encounter; always confirm compatibility with your VIN before ordering.
- Gates: 7PK1010 (7-rib, 1010 mm length) or equivalent 7-rib belt
- Dayco: 7PK1010 or equivalent 7-rib belt
- Continental: 7PK1010 or similar 7-rib option
Be aware that regional variations or factory options can shift the exact cross-reference. When in doubt, consult the dealer or an online parts catalog with your VIN.
What to do if you can’t find the part number
If the exact OEM part number still eludes you, contact a Honda dealer or a trusted mechanic with your VIN. They can pull the precise belt number for your car’s configuration and guide you to the correct aftermarket alternative.
In summary, the one-size-fits-all answer doesn’t exist for the 2010 CR-V’s serpentine belt; verify with your VIN and hood routing label to obtain the exact part number, then reference reputable catalogs for cross-reference and availability.
Summary: The 2010 Honda CR-V uses a serpentine belt whose exact part number varies by engine and options. Use the VIN, hood diagram, and official catalogs to identify the correct number and consider common cross-references such as Gates 7PK1010, Dayco 7PK1010, and Continental 7PK1010 as guidance.
What is the part number of the serpentine belt on a 2010 Honda CR-V?
56992-REZ-A01
NEW GENUINE HONDA CRV CR-V SERPENTINE DRIVE BELT 2010 - 2011 56992-REZ-A01.
How much does it cost to replace a serpentine belt on a 2010 Honda CR-V?
The average cost for a Honda CR-V Serpentine Belt Replacement is between $104 and $166. Labor costs are estimated between $54 and $79 while parts are priced between $50 and $87.
How to find serpentine belt number?
This industry standard number, frequently denoted as the “PK” number, is printed next to the manufacturer's part number on almost every serpentine belt produced, and can be seen in the examples below. WHAT IS A “PK” NUMBER? A “PK” number is a worldwide standard metric belt measurement printed on most serpentine belts.
What is the part number of the serpentine belt on a 2011 Honda CR-V?
56992REZA01
A-Premium 56992REZA01 Engine Serpentine Drive Belt Compatible with Honda CR-V CRV 2010 2011, L4 2.4L.