There isn't one universal knock sensor part number for the 2006 Honda CR-V; the correct sensor depends on the engine code and regional market, so you must verify your VIN to identify the exact part.
Why the part number varies
Honda uses multiple knock sensor part numbers across its engine families and regions. The 2006 CR-V’s 2.4-liter engine has several variants over its production run, and different markets may use different supplier parts. The result is more than one PN that could fit the same car depending on the installed engine code and VIN. Relying on the wrong PN can lead to fitment issues or incorrect sensor readings.
Engine code variants and regional differences
Several engine variants were used in the 2006 CR-V across markets. The knock sensor number is tied to the exact engine code and the regional catalog you’re referencing. Before ordering, confirm the engine family and any region-specific revisions so you choose the correct sensor.
How to determine the correct knock sensor for your CR-V
To locate the exact PN, gather vehicle identifiers and cross-check them with official catalogs or a dealer. The steps below guide you through the process.
- Locate your vehicle's VIN and confirm the engine code from the under-hood tag, door jamb sticker, or owner's manual.
- Identify the engine code on the engine block or cylinder head; the code helps narrow the PN range.
- Access the Honda Parts Catalog (or contact a dealer) and search by VIN or engine code to retrieve the exact knock sensor PN for your vehicle.
- Compare the PN on the old sensor (if replacing) with catalog results, or confirm compatibility with the dealer before ordering.
- Consider OEM vs aftermarket options and check for any service bulletins that specify revised sensor numbers for this model year.
Following these steps will help ensure you order the correct knock sensor for your vehicle.
Where to verify or buy a knock sensor
Once you have the correct part number, you can verify options with the official catalogs or trusted retailers. Always cross-check the PN against your VIN and engine code and confirm fitment with a dealer if you have any doubt.
- Honda's official Parts Catalog (online or at a dealership)
- Authorized Honda retailers and OEM parts sellers
- Vehicle-specific resources or service bulletins provided by Honda
- Independent repair shops with access to OEM lookup tools
In all cases, accuracy comes from aligning the PN with the engine code and VIN rather than relying on a generic listing.
Summary
The knock sensor part number for a 2006 Honda CR-V is not fixed; it depends on your engine code and market. By identifying the engine code, confirming the VIN, and checking Honda's official catalogs, you can determine the exact part number and order the correct sensor, ensuring proper engine timing and knock control.
Can you drive a Honda with a bad knock sensor?
Yes you can drive your vehicle even after its knock sensor fails. But it's not recommended a faulty knock sensor can on some platforms.
What is the knock sensor part number for a 2007 Honda CR-V?
30530-PPL-A01
Genuine Honda 30530-PPL-A01 Knock Sensor.
What is the part number for the knock sensor on a Honda CR-V?
30530-5PA-A01
30530-5PA-A01 - Knock Sensor | Genuine Honda Parts.
What is the code for knock sensor on Honda?
P0325 stands for “Knock Sensor Malfunction (Sensor 1, Bank 1).” This indicates the powertrain control module (PCM) recognizes an issue with the knock sensor or its circuit. Faulty knock sensors, circuit problems, and issues with the PCM are some of the common causes of the P0325 code.