Most Honda Accords use a 5x114.3 mm bolt pattern (five lug holes on a 114.3 mm circle). The center bore is typically 64.1 mm.
The lug pattern describes how a wheel mounts to the hub. For the Accord, the standard pattern has remained largely consistent across generations, but there can be rare variations by year, market, or trim. When choosing wheels or tires, also consider hub bore size, offset, and the compatibility of lug nuts and lug seat type.
Standard lug pattern for the Honda Accord
Below are the core specifications you’ll most commonly encounter for modern Accord models.
- Bolt pattern: 5 bolts on a 114.3 mm circle (5x114.3).
- Center bore: 64.1 mm.
These values cover the primary wheel mounting interface for the vast majority of Accords sold in recent decades. Always verify against your exact vehicle by checking the owner’s manual, the car’s data plate on the door jamb, or the wheel itself.
How to confirm your specific car’s lug pattern
Because there are occasional variations by market or model year, use one of these verification approaches before buying wheels or adapters.
- Check the owner’s manual or a data plate on the driver’s door jamb for wheel specifications.
- Compare the mounting holes on your current wheels with a template or a spare wheel that you know fits the car.
- Measure the bolt circle diameter (BCD) by laying the ruler across the center of the bolt holes and measuring from the center of one hole to the center of the opposite hole.
If you still aren’t sure, ask a professional at a dealer or a trusted tire shop to verify using your VIN. This ensures you won’t run into fitment issues when replacing wheels or tires.
Summary
The Honda Accord commonly uses a 5x114.3 bolt pattern with a 64.1 mm center bore for most modern years. Always confirm for your exact vehicle since rare market-specific variations exist. Checking the owner’s manual, data plate, or consulting a professional helps ensure correct wheel fitment and safe installation.