The primary fuel filter/water separator for the 2011 6.7L Power Stroke is Ford part number 6C3Z-9F924-BA, and the service replacement element is Motorcraft FL1995. Always verify the exact revision for your vehicle using your VIN.
In 2011, Ford’s 6.7L Power Stroke uses a two-stage fuel filtration system. While the numbers above cover the core filters, there can be revision updates or VIN-specific variations. For the most accurate match, check Ford’s official parts lookup or consult a dealer with your VIN.
Common part numbers for the 2011 6.7L Power Stroke fuel filtration
To help ensure you’re ordering the correct components, here are the typical OEM references used with the 6.7L Power Stroke configuration:
- Primary fuel filter/water separator: Ford OEM 6C3Z-9F924-BA
- Service replacement element: Motorcraft FL1995
These parts are widely recommended for normal maintenance, but variations can exist depending on production revisions and regional supply. Always confirm with a VIN-based parts lookup before purchase.
How to confirm the exact part for your vehicle
Before you order, use these steps to ensure you get the precise filter for your truck:
- Locate your vehicle’s VIN and engine code (often found on the driver’s door pillar or dash).
- Visit FordParts.com or your local dealer’s parts portal and enter the VIN to pull up the exact fuel filter kit for your truck.
- Cross-check the listed part numbers (6C3Z-9F924-BA for the primary filter, FL1995 for the service element) against what the site shows for your VIN.
- Ensure you’re selecting the correct combination (primary/fuel water separator plus the replacement filter) if you’re performing a two-part replacement.
- Purchase from a reputable source and follow the service manual for proper installation and bleeding procedures.
Verifying with VIN-based catalogs reduces the chance of ordering the wrong revision or a misfit filter, especially since Ford and aftermarket suppliers occasionally update part numbers.
Practical buying tips
Consider these pointers when shopping for the fuel filters:
- Stick with OEM or Motorcraft-branded replacements for the best fit and reliability with the 2011 6.7L Power Stroke.
- Some aftermarket catalogs list interchangeable equivalents; confirm compatibility with your VIN to avoid fitment issues.
- Check the packaging for both the primary filter (water separator) and the service filter element if you’re replacing both parts at the same time.
Following these buying tips helps ensure you receive the correct parts and avoid misfits or unnecessary returns.
Summary
For a 2011 Ford Power Stroke 6.7L, the main fuel filter assembly is typically 6C3Z-9F924-BA, with the service replacement element FL1995. Always verify the exact part numbers using your VIN via Ford’s parts lookup or a licensed dealer, as revisions can occur and may affect the correct match for your truck. Maintaining the correct fuel filtration is essential for protecting the fuel system and engine performance.