The bolt pattern on most modern Audi S3 models is 5x112 mm. The first-generation S3 (8L) used a 5x100 mm pattern.
Beyond this quick answer, the pattern can vary by generation and market, so it’s important to verify the exact specification for your specific car before buying wheels. The following guide outlines the bolt patterns by generation and what to check when swapping wheels.
Bolt pattern by generation
Here is a generation-by-generation look at the common bolt patterns and center bore sizes for the Audi S3. Always confirm with your VIN or official documentation for your exact vehicle, as there can be regional differences or special editions.
- 8L S3 (1999–2003) — PCD: 5x100 mm; center bore: 57.1 mm.
- 8P S3 (2006–2013) — PCD: 5x112 mm; center bore: 66.6 mm.
- 8V S3 (2013–2020) — PCD: 5x112 mm; center bore: 66.6 mm.
- 8Y S3 (2020–present) — PCD: 5x112 mm; center bore: 66.6 mm.
Concluding note: When swapping wheels, verify hub bore compatibility and the correct PCD. If you’re using aftermarket wheels with a different center bore or PCD, you may need hub-centric rings or adapters to ensure a proper, safe fit. Always consult official specifications for your exact model year.
Practical verification tips
To confirm the bolt pattern for your specific car, check the owner's manual, the Audi official parts catalog, or a reputable wheel retailer. If buying used wheels, measure the bolt circle diameter (PCD) and center bore to avoid fitment issues.
Summary
In short, the Audi S3 typically uses a 5x112 mm bolt pattern for most modern generations, while the original 8L generation used 5x100 mm. Always verify your exact vehicle’s specs by consulting official documentation or your VIN, especially before purchasing wheels or tires.