The bolt pattern for most Honda CR-V models is 5x114.3 mm (5 on 4.5 inches), with a center bore around 64.1 mm. Always verify your exact year and market, as there can be exceptions.
Bolt pattern basics for the CR-V
Generational and market variations
Most CR-V generations sold in North America and many other markets share a 5x114.3 mm bolt pattern. However, there are occasional year- or market-specific variances, so it’s important to confirm the spec for your exact vehicle.
Below are the core details to keep in mind when shopping wheels or tires for your CR-V.
- Bolt pattern: 5 lug holes on a 114.3 mm (4.5 in) bolt circle.
- Common market: US/NA and many other regions use this pattern; always verify for your year and region.
- Center bore: typically around 64.1 mm; hub-centric rings may be required if wheels have a larger bore.
- Wheel compatibility: ensure the wheel offset and width are appropriate for your CR-V, as improper offset can affect clearance and handling.
In short, when fitting wheels for a CR-V, aim for a 5x114.3 mm bolt pattern with attention to bore size and offset. Always verify against your specific VIN/year to avoid fit issues.
How to verify the bolt pattern on your CR-V
Step-by-step verification
To confirm your vehicle’s wheel pattern, follow these steps or consult official documentation before purchasing new wheels:
- Count the lug holes on your wheel hub; a 5-lug pattern will have five lug studs.
- Measure the bolt circle diameter (PCD) by connecting the centers of opposite lug holes; for most CR-Vs this will be 114.3 mm (4.5 inches).
- Check the center bore size on the hub; for many CR-Vs this is around 64.1 mm. If your wheels have a smaller bore, you may need hub-centric rings.
- Confirm the thread pitch and lug nut type (often M12 x 1.5 on many Honda wheels) and ensure mounting hardware matches.
- Cross-check using your VIN on Honda’s official parts lookup or with a trusted tire/wheel retailer to pull the exact spec for your exact year/model and market.
If you’re unsure after measuring, consult a professional installer or your local Honda dealer to confirm the correct bolt pattern and bore size before buying wheels.
Summary
The standard 5-lug bolt pattern for most Honda CR-V models is 114.3 mm (5x114.3), with a typical center bore near 64.1 mm. Variations can exist by year or market, so always verify your exact vehicle’s specs before purchasing wheels or tires. This helps ensure proper fit, safe handling, and optimal performance.