The Ford Explorer generally uses a 5-lug on 114.3 mm (5x4.5 inches) bolt pattern.
In practice, that means wheels mount with five studs arranged on a circle 114.3 mm apart. Center bore and related specs can vary by year and market, so it's wise to verify for your exact vehicle.
Bolt pattern basics for the Ford Explorer
Here are the core details you should know about the bolt pattern for most Explorers.
- Lug count: 5
- Bolt circle diameter: 114.3 mm (4.5 inches)
- Common center bore: about 67.1 mm (2.64 inches)
- Notes: This pattern covers most model years, from the early 1990s through today. Always confirm with your VIN or a parts specialist if you have a special edition or region-specific model.
In short, the typical setup is 5x114.3 mm with a center bore around 67.1 mm, but you should confirm for your specific year and market.
How to verify the exact bolt pattern for your Explorer
To ensure you have the exact fit for your vehicle, check these reliable sources and quick checks.
- Look at the driver’s door placard or the fuel filler door; it usually lists the lug pattern and wheel size for your vehicle.
- Consult the owner's manual or the build sheet tied to your VIN for specifications.
- Contact a Ford dealer or a trusted wheel/tire shop with your VIN to confirm the correct bolt pattern for your exact model and year.
By verifying these details, you avoid ordering wheels that don’t fit and ensure proper clearance and safety.
Summary
For most Ford Explorers, the standard wheel setup is a 5-on-114.3 mm bolt pattern (5x4.5 in) with a center bore around 67.1 mm. While this covers the vast majority of model years, always confirm with your vehicle’s VIN or manufacturer resources, especially if you own a special edition or market-specific model.