The bolt pattern is 5-lug on a 108 mm circle (5x108). This is the standard configuration for most 2013 Focus models, including both North American and European market versions.
Bolt pattern specifics
Below are the essential metrics you’ll encounter when assessing wheels for this model. The list focuses on the core compatibility factors for a 2013 Focus.
- Five lug holes on a 108 mm bolt circle (5x108)
- Equivalent size in inches: 5 on 4.25 inches
- Center bore commonly around 63.4 mm (verify on your vehicle)
Note: Center bore and lug-nut sizing can vary by trim or regional spec. Always confirm with your VIN or the vehicle’s manual before buying wheels.
Why the bolt pattern matters
Using wheels with the wrong bolt pattern can lead to unsafe mounting and poor handling. The 5x108 pattern is widely supported for the Focus, but correct center bore, offset, and lug hardware are also essential for a proper fit.
How to verify on your vehicle
To confirm your exact setup, use these practical checks:
- Check the owner’s manual or the door placard for wheel specs (look for "Bolt circle" or "Lug pattern").
- Measure the bolt circle on your current wheels or hub by measuring the distance between lug-hole centers across the wheel.
- Compare with the 5x108 pattern and verify center bore around 63.4 mm; confirm offset with wheel spec sheets.
If you’re uncertain, consult a dealer or tire shop with your VIN to ensure you get wheels that truly fit your car.
Summary
For a 2013 Ford Focus, the standard bolt pattern is 5x108 (five-lug on a 108 mm circle, equivalent to 5x4.25 inches). Verify center bore and offset for your specific trim and market, and when in doubt, consult official specs or a professional.