The 2008 Audi S5 uses a 5-lug pattern on a 112 mm bolt circle with a 66.6 mm center bore.
The bolt pattern describes how many lug holes a wheel has and the circle they form. For the 2008 S5, the standard is a 5x112 bolt pattern, a common configuration across many Audi models of that era, which simplifies wheel swaps among compatible Audi cars—though you must verify hub bore and offset for the exact wheel you choose.
Key specifications you need to know
Before listing the essential specs, note that wheel compatibility depends on several factors: bolt pattern, center bore, offset, and caliper clearance. The primary specs for the 2008 S5 are:
- Bolt pattern: 5x112 (five lug holes arranged on a 112 mm circle)
- Center bore: 66.6 mm
- Hub-centric design: Many Audi wheels are hub-centric; aftermarket wheels may require a hub ring to fit perfectly on the vehicle’s hub
In practice, these specs guide which wheels will mount correctly and align with the car’s braking and steering geometry.
Why this matters for wheel shopping
Knowing the exact bolt pattern and center bore helps you avoid ill-fitting wheels or clearance issues. If you’re buying used wheels from another Audi model or an aftermarket brand, confirm the 5x112 pattern and 66.6 mm bore, and check offset and brake caliper clearance as well.
Additional considerations
Other factors to consider when selecting wheels include offset (which affects wheel fitment and fender clearance), wheel width, and whether a hub ring is needed to center the wheel on the hub. Always verify the VIN or consult a wheel specialist if you plan to mix parts across models.
Summary
For the 2008 Audi S5, expect a 5x112 bolt pattern with a 66.6 mm center bore. This configuration is common among late-2000s Audis and supports many wheel swaps within the brand, provided you match offset, hub rings, and caliper clearance.