The bolt pattern for a 2007 Honda Fit is 4x100, meaning four lug studs arranged on a circle with a diameter of 100 millimeters.
In addition to the lug pattern, you should note the hub bore and wheel offset to ensure a proper fit. For the 2007 Fit, the hub bore is typically 56.5 mm, and you should verify the exact offset for any wheels you plan to use. Always confirm these specs with the owner's manual or the wheel manufacturer.
Key specs to check
These are the core measurements most people use when assessing wheel compatibility for the 2007 Fit. Numbers are in millimeters unless stated.
- Bolt pattern: 4x100
- Center bore: 56.5
With these specifications, you can determine compatibility and whether hub rings or spacers are necessary for a proper fit.
Practical considerations
Beyond the bolt pattern and bore, consider wheel offset, width, and diameter to ensure brake clearance and suspension geometry. The Fit typically uses a positive offset around +40 to +45 mm, but verify the exact value for your specific wheels. If the wheel bore is larger than 56.5 mm, hub-centric rings may be required to ensure proper centering.
These specs help ensure safe mounting and optimal performance when selecting replacement wheels for your 2007 Honda Fit.
Summary: The bolt pattern on a 2007 Honda Fit is 4x100, with a 56.5 mm center bore; verify offset and clearance when choosing wheels.