The 2006 Honda CR-V uses a 5-lug, 114.3 mm bolt pattern (often written as 5x114.3 or 5x4.5 inches). This means five lug holes arranged on a circle with a 114.3 mm diameter, and you’ll want wheels that match this pattern for proper fitment.
What the bolt pattern means for wheels
The bolt pattern identifies how many lug studs a wheel uses and the diameter of the circle that passes through their centers. For a 2006 CR-V, five lugs are arranged on a circle 114.3 mm in diameter (4.5 inches). Matching this pattern is essential for safe installation, and other factors like center bore and offset influence fitment and braking performance.
Key measurements to check
Use this checklist when selecting wheels for a 2006 CR-V:
- Bolt pattern: 5x114.3 mm (5 on 4.5 inches)
- Center bore: 64.1 mm; hub-centric rings can adapt a larger bore
- Offset (ET): typically around +50 mm, but verify for your trim and wheel width
- Brake clearance and spoke design to ensure no contact with calipers or spokes
Having these aligned helps ensure proper seating, braking performance, and ABS function.
How to verify fitment in practice
When buying aftermarket wheels or replacing damaged rims, verify fitment with the following steps:
- Confirm the vehicle’s bolt pattern as 5x114.3 mm on the tag or manufacturer spec sheets
- Measure the wheel center bore and compare to the hub on the CR-V; plan for hub-centric rings if needed
- Check offset compatibility for your trim to avoid rubbing or altered suspension geometry
- Test fit the wheel with brake pads, calipers, and fenders to ensure clearance
If you’re not confident, consult a tire shop or dealership to confirm compatibility with your specific CR-V build and wheel size.
Summary
In short, the 2006 Honda CR-V uses a 5x114.3 mm bolt pattern (5-lug, 114.3 mm circle). When replacing wheels, match this pattern, confirm a suitable center bore of about 64.1 mm, and verify offset and clearance to maintain safe operation and proper brake function.