The oil filter number for a 2008 Honda Odyssey is Honda Genuine Part 15400-PLM-A02. This is the standard filter for most U.S. models equipped with the 3.5L V6, though regional production variations can exist. Always verify with your VIN if you’re buying from a dealer or an aftermarket retailer.
Understanding the engine and filter layout
The 2008 Odyssey uses a 3.5-liter V6 engine (commonly referred to by Honda as the J35A family in that era) and employs a spin-on oil filter. This configuration is typical for the model range from the mid-2000s, with the filter part number most often aligning to the OEM specification for easy replacement during routine maintenance.
OEM part number and cross-references
To ensure compatibility, rely on the official Honda part number and confirm with the retailer using the vehicle identification number (VIN) or engine code. The primary Honda OEM filter commonly associated with the 2008 Odyssey is:
- 15400-PLM-A02
Note: If you’re shopping aftermarket, look for filters that specify compatibility with the 3.5L V6 (J35) engines and Honda applications. Some regions or production runs may use a closely related revision, so it’s prudent to double-check with the dealer or a trusted parts catalog using your VIN to confirm the exact part revision.
Regional variations and revision notes
In certain markets or production batches, a nearby revision of the same filter family may be used (for example, A01 or A03 revisions). The safest approach is to look up the exact part number using your vehicle’s VIN or consult the dealer portal to confirm the correct filter for your specific Odyssey build date and region.
How to confirm the correct filter for your vehicle
Before purchasing, follow these steps to verify you’re selecting the right filter:
- Locate your VIN (17-character code) on the driver’s side dash, door frame, or engine bay label and use it to look up the exact parts catalog entry.
- Check the owner’s manual or maintenance section for the recommended oil filter part number or specification.
- Ask the parts counter to verify the filter against your VIN and engine code (J35A) to prevent a mismatch.
Following these steps helps ensure you get the correct filter and avoid fitment issues that could affect oil filtration and engine protection.
Where to buy and what to expect
You can purchase Honda OEM 15400-PLM-A02 from Honda dealerships or authorized parts retailers. Aftermarket filters that specify compatibility with the 3.5L V6 engine are widely available at auto parts stores and online retailers. Prices vary by brand and region, with OEM parts typically priced higher than some aftermarket options. Always ensure the filter meets OEM specifications for the 3.5L V6 to maintain proper oil filtration and engine longevity.
Summary
For most 2008 Honda Odyssey models, the oil filter part number to know is Honda 15400-PLM-A02. Always verify with your VIN to account for regional or production variations, and consult official Honda catalogs or trusted retailers to confirm the exact replacement part before purchasing.