The 2004 Honda Accord uses a 5-lug bolt pattern on a 114.3 mm bolt circle (5x114.3).
This pattern applies to most 2004 Accord sedans and coupes across trims, including LX, EX, and SE. It matters for wheel fitment, brake clearance, and proper hub alignment.
Bolt pattern basics
A bolt pattern describes how many wheel studs the hub has and the diameter of the circle those studs form. For the 2004 Accord, there are five studs arranged on a 114.3 mm circle.
Official specs for the 2004 Accord
Key measurements to verify before wheels are listed below.
- Bolt pattern: 5x114.3 mm (5-lug)
- Center bore: 64.1 mm
- Lug nut size: M12x1.5
These specs cover stock configurations and most compatible aftermarket wheels. If you're fitting wheels, verify your specific wheel's hub bore and offset to ensure proper fitment; consider hub-centric rings if needed.
Notes on compatibility and upgrades
Aftermarket wheels or spacers may require attention to offset and clearance with the brake calipers and suspension. Verify fitment with the vehicle's year and trim, and consult the wheel manufacturer or a tire shop if in doubt.
Summary
For a 2004 Honda Accord, expect a 5x114.3 bolt pattern, a 64.1 mm center bore, and lug nuts sized M12x1.5. These specs guide wheel selection and help prevent fitment issues across OEM and aftermarket options.