The 2008 Honda Accord uses a 5-lug bolt pattern on a 114.3 mm bolt circle, with a center bore of 64.1 mm.
This specification applies to both the sedan and coupe versions of the 2008 Accord, covering common trims and wheel configurations. Understanding these measurements helps ensure a proper fit when selecting replacement rims or aftermarket wheels.
Bolt pattern specifics
Before listing the exact measurements, here is a concise summary of what to look for when assessing wheel compatibility for the 2008 Accord.
- Five lug holes on a 114.3 mm (4.5 inch) bolt circle (5x114.3).
- Center bore of 64.1 mm.
These specifications are standard across the 2008 Accord sedan and coupe. When shopping for wheels, matching both the bolt circle and center bore is essential to ensure proper alignment and mounting stability.
Additional considerations
If you are considering aftermarket wheels with a different center bore, offset, or hub size, you may need hub-centric rings or spacers to maintain proper fit and balance. Always verify compatibility with your specific trim and wheel model before purchase.
Summary
The 2008 Honda Accord commonly employs a 5x114.3 bolt pattern with a 64.1 mm center bore for both sedan and coupe variants. Verified compatibility of wheel diameter, offset, and bore is key to a safe and effective wheel replacement.