The 2007 Honda Accord uses a 5-lug bolt pattern on a 114.3 mm circle, commonly written as 5x114.3.
In North American models, this means the wheels bolt onto five studs arranged around a circle with a 114.3 mm diameter. The center bore is typically 64.1 mm, and aftermarket wheels marketed for 5x114.3 should be compatible, subject to brake clearance and offset considerations. Variations can exist for different markets or trims, so whenever possible verify the exact spec for your VIN.
Details and related measurements
These measurements accompany the bolt pattern and matter when selecting wheels and adapters.
- Bolt pattern: 5x114.3 mm (5 lug on a 114.3 mm bolt circle)
- Common alternative naming: 5-114.3 or 5x4.5 inches
- Center bore: 64.1 mm
With these specs in mind, you can determine if a given wheel will line up with the Accord’s mounting surface and hub.
How to confirm wheel compatibility
To verify that a given wheel will fit your 2007 Accord, follow these steps:
- Check the vehicle’s owner’s manual or a dealership spec sheet for the exact bolt pattern, center bore, and hub size for your VIN.
- Measure the hub bore on the vehicle. If the wheel’s center bore is larger, a hub-centric ring may be needed to center the wheel properly.
- Count the lug studs and verify the bolt circle diameter is 114.3 mm (5x114.3).
- Confirm the wheel offset (ET) and backspacing will fit without rubbing brake components or the suspension.
- Obtain a test fit from a reputable tire/wheel shop to ensure clearance and proper seating.
If you have doubts, consult a professional mechanic or wheel specialist to avoid clearance or safety issues.
Summary
In short, the correct bolt pattern for a 2007 Honda Accord is 5x114.3 mm (5 lug on a 114.3 mm circle), with a typical center bore of 64.1 mm. Always verify the hub bore and offset for your specific vehicle configuration and market, and seek expert fitting help if you’re mixing wheels and tires.