The bulb type depends on your Dart’s trim and whether it has halogen or HID headlights. In most halogen setups, low beams use H11, high beams use 9005, and fog lights (if equipped) use H11. HID-equipped cars use HID bulbs with ballast (commonly D2S or D3S, depending on the specific system). Always verify the exact sizes for your vehicle using the owner's manual or the label on the headlight assembly or door jamb.
In practice, the 2014 Dodge Dart was offered with both halogen and optional HID headlight configurations across different trims and markets. Halogen headlights were standard on many models, providing straightforward replacements with readily available bulbs. The HID option requires matching ballast and bulb types and can vary by trim, package, and region. The following guide outlines typical configurations and how to confirm your exact setup.
Common halogen configuration
Before listing typical sizes, note that variations can occur by trim and market. The following are the most commonly used halogen bulb sizes for 2014 Darts with halogen headlights.
- Low beam: H11
- High beam: 9005 (HB3)
- Fog lights (if equipped): H11
Halogen setups offer easy sourcing of replacement bulbs and are compatible with a wide range of high-performance halogen options if you want brighter light or longer lifespan.
Trim- and market-based variations
Some trims or regional versions may swap bulb types for low beams or fogs. For example, certain packages or markets could use a different low-beam bulb (such as 9006) or vary fog light bulbs. Always confirm using official documentation or by inspecting the bulb label in your headlamp assembly.
Common HID configuration
Before listing HID bulb details, remember that HID systems require the correct ballast and bulb pairing. The exact bulb base can differ by trim and market. The following sizes apply to many HID-equipped 2014 Darts, but you should verify for your specific vehicle.
- Low beam: D2S or D3S (depends on the ballast and housing used by the trim and market)
- High beam: Often not a separate HID bulb; some systems use a separate halogen bulb or a dedicated high-beam HID option, depending on configuration
- Fog lights: In many HID-equipped models, fogs are still halogen (commonly H11 or H9); some markets may vary
HID headlights require proper ballast and wiring, and mismatched components can cause flicker, failure to start, or poor performance. Confirm the exact base and compatibility before purchasing replacements.
How to verify your exact bulb sizes
To avoid guessing, use these verification steps:
- Consult the owner's manual or the section specifically listing headlight bulb sizes for your trim
- Check the driver-side door jamb sticker for bulb-type information or recommended bulb sizes
- Remove the headlight dust cover and read the bulb base stamping when the bulb is out
- Contact a Dodge dealer or use your VIN to pull up the exact bulb specification from the official parts catalog
Accurate verification ensures you buy the correct bulbs for your exact configuration and avoid compatibility issues.
Summary
For a 2014 Dodge Dart, bulb types vary by whether the car uses halogen or HID headlights and by trim/market. Halogen models typically use H11 for low beams, 9005 for high beams, and H11 for fogs (if equipped). HID-equipped models use ballast-based HID bulbs (commonly D2S or D3S for low beams), with high-beam and fog configurations potentially different from halogen setups. To ensure accuracy, verify with the owner's manual, the door jamb label, or the dealer via the vehicle’s VIN. This approach guarantees you source the correct bulbs for your specific Dodge Dart.