In brief, most 2013 Edge models with halogen headlights use H11 for the low beam and 9005 for the high beam. If the vehicle is equipped with HID headlights, xenon bulbs such as D1S, D2S, or D3S are used depending on the ballast. Always verify by checking the owner’s manual or inspecting the bulb in your headlight assembly.
This article outlines the two main headlight configurations that appeared on the 2013 Ford Edge, how to identify which one your car has, and what bulbs you should purchase if you need to replace them.
Two main headlight configurations in the 2013 Edge
The 2013 Ford Edge offered halogen headlights on most trims and optional HID (xenon) headlights on higher-end or equipped models. The replacement bulbs differ between these setups, so identifying which system your Edge has is important before buying replacements.
Halogen headlights (the most common configuration)
If your Edge uses halogen headlights, the bulbs are straightforward to replace and the following are the standard types:
- Low beam: H11
- High beam: 9005 (also sold as HB5)
- Front fog lights (if equipped): H11
In halogen-equipped Edges, replacing bulbs is typically a quick, plug-and-play process using standard automotive bulbs you can find at most parts stores.
HID headlights (optional on some trims)
On trims with HID headlights, the headlight system uses xenon bulbs rather than standard halogen bulbs. The exact bulb type depends on the ballast and projector design, but common possibilities include the D1S, D2S, or D3S family of bulbs.
- Low beam: a xenon bulb (typical options include D1S, D2S, or D3S depending on the ballast)
- High beam: may be a separate bulb (often not a xenon bulb in every design); some configurations use a separate halogen bulb or a dedicated xenon high-beam setup. Check your specific model’s manual or inspect the headlamp to confirm.
Because HID systems vary by production year and option package, always confirm the exact bulb type for your vehicle by checking the owner’s manual, the headlight ballast label, or the existing bulb itself.
How to confirm the exact bulb type for your car
Identifying the correct bulb type for your 2013 Edge helps avoid buying the wrong replacement. Here are practical steps you can take:
- Check the owner’s manual under the lighting or bulb replacement section for the exact specification for your trim and headlight type.
- Inspect the bulb currently installed in the headlight housing; the bulb sleeve or base usually shows the type (e.g., H11, 9005, D1S, D2S, D3S).
- If the headlights are HID, look for a ballast unit mounted near the headlight; the ballast label often indicates the matching bulb family (D1S/D2S/D3S).
- When in doubt, ask a dealership or a trusted automotive retailer with your VIN or the exact trim level and headlight type.
Taking these steps helps ensure you purchase the correct bulbs and avoid compatibility issues or installation problems.
Summary
The 2013 Ford Edge can have either halogen or HID headlights. Halogen models use H11 for low beams and 9005 for high beams, with H11 also commonly used for fog lights. HID-equipped models use xenon bulbs (typically D1S, D2S, or D3S) depending on the ballast, and high-beam configurations may vary. Always verify with the owner’s manual or by inspecting the current bulb to ensure you buy the correct replacements.