Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What kind of refrigerant does a 2006 Honda Civic take?

The 2006 Honda Civic uses R-134a refrigerant for its air conditioning system.


That refrigerant type is standard for most cars built in the early 2000s, replacing the older R-12. For servicing, you should use R-134a with the correct lubricant, and avoid mixing it with R-12 or any other refrigerant. The exact amount of refrigerant and the oil capacity are listed on the vehicle’s under-hood label or in Honda’s service manual. If your system was ever charged with R-12 or you’re retrofitting from an older refrigerant, a retrofit procedure is required to ensure proper compatibility and performance.


Refrigerant type and service details


Before attempting a recharge or service, confirm the correct refrigerant type and lubrication requirements for your Civic’s specific A/C system.



  • Refrigerant type: R-134a (HFC-134a)

  • Lubricant: PAG oil suitable for R-134a systems (commonly PAG 46)

  • Mixing caution: Do not mix R-134a with R-12 or other refrigerants; if R-12 was previously used, a retrofit is required

  • Charge information: Refer to the under-hood label or Honda service manual for the exact refrigerant capacity and oil quantity


Following these guidelines helps ensure proper cooling performance, protects the compressor, and avoids system leaks or damage.


About newer refrigerants to watch out for


Some later-model vehicles began adopting different refrigerants (such as R-1234yf), but the 2006 Civic specifically requires R-134a. If you’re evaluating a different year or model, always check the vehicle’s label and manual to confirm the correct refrigerant for that system.


Summary


In short, the 2006 Honda Civic takes R-134a refrigerant with PAG oil. Verify the exact specifications on the vehicle’s label or in the official service manual, and have a qualified technician perform any recharge or retrofit to ensure optimal performance and longevity of the A/C system.

What kind of coolant does a 2006 Honda Civic take?


Honda coolant Type 2 is also a common match for the Honda Civic sedan, as it is advisable to avoid any fluid containing silicates.



What is the weakness of the Honda Civic?


Common Issues to Watch For in a Used Honda Civic
Suspension Wear. Rust Around Wheel Wells. CVT Transmission Hesitation. Worn Ignition Coils.



What refrigerant does a 2006 Honda Civic need?


Then what you want to do is put it put the dispenser. On. And turn the top part clockwise to open up the can. And then what you want to do is agitate. So just move it back and forth.



What AC refrigerant was used in 2006?


Freon is the common name for HCFC-22 and R-22 — the refrigerant that was standard in AC units until 2010. In a properly working unit, your Freon® level shouldn't change. However, if a repair is needed and the refrigerant leaks, replacing this older refrigerant will be difficult and increasingly expensive.


Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.