Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What headlight bulb does a 2009 Honda CRV use?

The 2009 Honda CR-V commonly uses H11 bulbs for the low beams and 9005 bulbs for the high beams; fog lights, when equipped, typically use H11 as well.


The 2009 CR-V is part of Honda’s third generation (2007–2011). While the standard setup is H11 for low beams and 9005 for high beams across most markets, bulb types can vary by trim or regional specifications. Always confirm by checking the owner's manual or inspecting the current bulb to compare markings.


Bulbs by function


Here is the typical configuration by headlight function for the 2009 CR-V. This helps you identify the correct replacement without trial and error.



  • Low-beam headlights: H11

  • High-beam headlights: 9005 (HB3)

  • Fog lights: H11 (where equipped)


In practice, most 2009 CR-Vs use H11 for the low beams and 9005 for the high beams, with fog lights using H11 on trims that include them.


Replacement tips and steps


Follow these steps to replace bulbs safely and ensure proper seating and alignment.



  1. Park on a level surface, turn off the engine, set the parking brake, and allow bulbs to cool before handling.

  2. Open the hood and locate the headlight assembly; access the bulb socket from behind the reflector housing.

  3. Disconnect the electrical connector from the bulb by pulling it straight back or releasing the locking mechanism.

  4. Remove the old bulb by turning the retaining ring or socket counterclockwise (as directed in the manual) and pulling it out.

  5. Install the new bulb, ensuring correct orientation; avoid touching the glass with bare fingers to prevent oil residues from shortening bulb life.

  6. Reconnect the electrical connector, reassemble any covers, and test the lights by turning on low and high beams to verify proper operation.


Following these steps helps ensure a correct fit and reliable illumination. If unsure, consult the owner's manual or a qualified technician.


Market and trim variations


Some markets or specific trims may use alternative bulbs due to regional regulations or factory options. Always verify against the official manual or dealership guidance to avoid mismatches.


Summary


For a 2009 Honda CR-V, plan for H11 low-beam bulbs, 9005 high-beam bulbs, and H11 for fog lights where equipped. Always confirm with the owner’s manual or by inspecting the current bulb, and follow proper replacement steps to ensure correct seating and alignment.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.