For most 2014 Ford Escape models with standard halogen headlights, the low-beam bulbs are H11, the high-beam bulbs are 9005, and the fog lights (if equipped) use H11. If your Escape has factory Xenon HID headlights, the bulbs are different (typically D3S or D2S) and may be paired with a different headlight configuration.
The exact bulb type can vary by trim and optional lighting packages. This article explains the common configurations and how to verify your specific vehicle’s bulb requirements so you can replace them correctly.
Halogen headlights: what to replace
Most 2014 Escapes use halogen headlights. Here is the common bulb mapping you’re likely to encounter when replacing a bulb in this configuration.
- Low beam: H11
- High beam: 9005
- Fog light (if equipped): H11
In plain terms, you’ll typically swap an H11 for the low-beam side, a 9005 for the high-beam side, and use H11 for fog lights when they’re present.
Xenon HID headlights: what to replace
Escapes with Xenon HID headlights use a different bulb type to generate the headlamps’ high-intensity discharge. The exact bulb codes depend on the ballast and system installed at the factory.
- Low beam: D3S or D2S (depending on the HID system in your vehicle)
- High beam: Often handled by the HID system; some setups use a separate halogen high-beam bulb
- Fog lights: When present, typically separate halogen bulbs rather than HID
Because HID systems vary by production run and trim, always verify the exact bulb type from the manual or the existing bulb packaging before purchasing replacements.
How to confirm the correct bulb in your car
Use these steps to ensure you buy the right part the first time:
- Check the owner’s manual or the headlight assembly label for the recommended bulb code.
- Compare the current bulb or its packaging to the code you find on the label.
- If you’re unsure, contact a Ford dealer parts desk with your VIN to confirm the precise bulb type for your exact trim and option package.
With the right bulb information in hand, you’ll prevent incorrect purchases and ensure proper fit and performance.
Summary
In most cases, replace halogen low beams with H11 and high beams with 9005, with H11 for fog lights on the 2014 Ford Escape. If your model uses HID headlights, expect D3S or D2S bulbs for the HID portion, and verify whether a separate high-beam bulb is used. Always refer to the owner’s manual or the bulb label on your car to confirm the exact specification for your vehicle.