The typical bolt pattern for most Honda Accord models is 5 on 114.3 millimeters (5x114.3) with a 64.1 mm center bore. This standard applies to the majority of modern Accords, though there can be year- or market-specific variations, so it’s wise to verify your exact configuration for your car.
Bolt pattern basics for the Honda Accord
Understanding the key specifications helps you choose compatible wheels and avoid fitment issues. The Honda Accord has a five-lug setup, and the essential measurements you’ll encounter are listed below.
- Bolt pattern: 5 lug holes (5-lug)
- Bolt circle diameter: 114.3 mm (4.5 inches)
- Center bore: 64.1 mm
- Lug nut size: typically M12 x 1.5 (thread pitch common across many Honda models)
These specs cover the vast majority of Accords built in recent decades. Some very early or region-specific variants may differ, so always confirm for your exact year and market.
Variations by year or market
While 5x114.3 with a 64.1 mm center bore is standard for most modern Accords, there have been exceptions based on production year, market (country), or very early model years. If you’re shopping for wheels from a different market or working with an older model, check the exact specification from the owner’s manual, the manufacturer’s wheel documentation, or a trusted parts retailer.
How to verify your exact bolt pattern
To ensure precise compatibility, follow these steps to confirm the bolt pattern for your specific Accord:
- Check the owner’s manual or official Honda specification sheet for your exact year and trim.
- Remove a wheel and inspect the wheel hub or rim stamping for pattern details or consult the wheel itself for stamped codes.
- Measure the bolt circle: from the center of one lug hole to the center of the opposite lug hole (for a 5-lug pattern, measure across the circle that passes through all lug holes).
Always verify not only the bolt pattern but also center bore size and brake clearance when choosing wheels. If in doubt, call a dealer or use a reputable wheel compatibility tool and provide your VIN to get a definitive fit.
Summary
In short, the Honda Accord most often uses a 5x114.3 bolt pattern with a 64.1 mm center bore, along with a typical lug nut size around M12 x 1.5. This covers the vast majority of modern Accords, but it’s important to confirm for your exact year, market, and trim to ensure proper fitment. When replacing wheels, double-check bolt pattern, center bore, and brake clearance, and consult official documentation or a qualified technician if you’re unsure.