How to use Infiniti touch up paint pen?

Match your Infiniti’s exact color code and apply the pen in thin, even coats, finishing with a clear coat if provided and letting it cure.

Infiniti touch-up pens are designed for small chips and scratches. To get the best result, locate your color code, obtain the matching paint pen (and clear coat if offered), prepare the area by cleaning and drying it, and then apply the paint in controlled steps. This guide outlines the complete process from color matching to finishing.

Identify color code and prepare the surface

Before you begin, you need the exact color code and a clean surface to ensure the color matches and adhesion is good. The following steps cover how to obtain the right color and prep the area.

1. Find the color code on the vehicle’s labels (typically on the door jamb sticker or under the hood) and order a compatible Infiniti touch-up pen in that exact color. For metallic or pearl finishes, you may need both a base color pen and a separate clear coat pen.


2. Wash and dry the chipped area thoroughly. Use a mild soap, rinse well, and dry completely to remove any dirt, wax, or oils.


3. Wipe the area with isopropyl alcohol or a dedicated surface prep wipe to ensure a clean, bare surface. If there is rust or flaking, address that before painting (lightly sand and remove loose material as needed).

Conclusion: Accurate color matching and a clean, dry surface are essential for a durable, seamless repair.

Apply the paint with the Infiniti touch-up pen

These steps describe how to apply the color with the pen in thin, controlled coats to match surrounding paint and avoid overflow.

1. Shake the pen for about 60 seconds to mix the pigment. Prime the nib by pressing it gently onto a piece of cardboard until the paint begins to flow.


2. Using short, light taps, apply small amounts of paint into the chip, aiming to slightly overfill beyond the chip’s edge without pooling.


3. Allow the paint to dry to the touch, typically 10–20 minutes depending on temperature and humidity. Apply a second thin coat as needed, repeating until the chip sits level with the surrounding surface.

Conclusion: Several ultra-thin coats, with adequate drying time between each, yield the best color match and a smooth finish.

Finish and protection

After the color coat has cured, protect the repaired area with a clear coat if your kit includes one, and perform final finishing steps to blend with the rest of the paint.

1. If a clear coat is included, apply it in thin layers over the color once the color has cured for the time specified by the product instructions.


2. Allow the clear coat to dry fully, then gently buff with a soft microfiber cloth to blend edges. Avoid heavy rubbing that could damage the repair.


3. Let the repaired area cure in a dust-free environment for 24–48 hours before washing or exposing it to harsh conditions.

Conclusion: Proper sealing, curing, and gentle finishing help the repair withstand washing and weather exposure while remaining visually discrete.

Tips, caveats, and safety

Important reminders: Use the touch-up pen in a well-ventilated area, wear gloves if needed, and test color accuracy in a hidden area before applying to visible surfaces. If the chip is deep, large, or you’re not confident about color matching, consult a professional or Infiniti service advisor for OEM options or color matching services.

Summary

Infiniti touch-up paint pens offer a precise way to repair small chips and scratches. By identifying the correct color code, preparing the surface, applying thin color coats, and protecting with a clear coat, you can restore the vehicle’s appearance with minimal tools and cost. For larger damage or uncertain color matching, seek professional assistance.