You can view mileage on a 2015 Honda Accord by cycling the instrument cluster display between the odometer (total miles) and the two trip meters (Trip A and Trip B) using the built-in control near the gauges.
On this model year, mileage data lives in the instrument cluster behind the steering wheel. Some trims also include a central information display that can show additional stats like fuel economy and range. This guide walks you through locating, viewing, and resetting mileage readings.
Viewing mileage on the standard instrument cluster
To access the basic odometer and trips, use the small control on or around the gauge cluster. This control lets you toggle what the display shows without starting the engine.
- Turn the ignition to ON (you don’t need to start the engine).
- Locate the small button or knob on the instrument cluster labeled something like ODO/TRIP or TRIP. It may sit near the speedometer or on the edge of the gauge panel.
- Press the control once to switch to the odometer (total miles).
- Press again to view Trip A, then press again to view Trip B.
- Read the mileage displayed for each mode.
By cycling through these readings, you can quickly check total mileage and each trip’s distance without using any special tools.
Resetting trip meters
If you want to measure a new trip, you can reset Trip A or Trip B to zero. Do this while the display is showing the trip you want to reset.
- Ensure the display shows Trip A or Trip B you wish to reset.
- Press and hold the same ODO/TRIP control until the numbers reset to zero.
- Release the control; the trip meter is now reset and will start counting again from zero.
Resetting trip meters is useful for tracking the distance of individual trips, fuel stops, or daily driving.
Additional mileage information on higher trims
Some higher-trim models offer a more expansive information display that can show fuel economy, distance to empty, and other trip statistics in a central screen. Access it with the steering-wheel controls and the INFO or MENU button, then cycle to the mileage-related readouts.
What you can view on the information display
In trims equipped with the extra display, you may see:
- Average fuel economy (MPG) for current driving
- Current range based on remaining fuel
- Elapsed time and distance for the current trip
- Maintenance reminders or system statuses
Use the INFO or MENU button on the steering wheel and the corresponding selector to navigate through these options. Return to the main odometer/trip readouts when you’re done.
Troubleshooting and quick reminders
If you don’t see any mileage on the display, ensure the ignition is on (not necessarily the engine), and try cycling the control a few times. In rare cases, a display issue may require a dealer inspection or a brief consult of the owner’s manual for model-specific controls.
Summary
In a 2015 Honda Accord, mileage is primarily accessed via the instrument cluster by cycling between the odometer (total miles) and Trip A/Trip B using a small control near the gauges. Trip meters can be reset by holding the control while on the respective trip display. Higher trims may offer a more detailed information display with additional mileage-related stats. This quick method lets you monitor overall distance and trip performance without special tools.