The TPMS (tire pressure monitoring system) on a 2016 Honda Odyssey is reset by bringing all tires to the recommended cold pressures and performing a relearn, which can be done either by highway driving or through the vehicle’s TPMS menu.
Understanding TPMS and why reset it
Quick in-vehicle relearn method
Before starting this method, confirm all four tires are inflated to the recommended cold pressures shown on the driver’s door placard. This method relies on driving to retrain the system.
- Check all four tires and the spare (if it is a full-size spare with a TPMS sensor) and inflate to the door placard specification, using a tire pressure gauge. Do this with the tires cold.
- Turn the ignition to ON (engine off). Do not start the engine.
- Drive at highway speeds (approximately 50 mph or higher) for at least 10 minutes to allow the TPMS to relearn the sensors.
- Watch for the TPMS light behavior: it should either go out or stop flashing once the relearn completes.
- If the light remains on after a sustained highway drive, proceed to the manual relearn method or seek assistance.
Following these steps typically resets the system and clears the warning if all tires are properly inflated and there are no sensor issues.
Manual relearn via the instrument cluster/menu
Some 2016 Odyssey models offer a TPMS relearn option in the vehicle’s settings menu. This method instructs the system to re-associate each wheel with its sensor.
- Ensure all tires are at the correct cold pressures (door placard values).
- Turn the ignition to ON (engine off).
- Use the steering wheel controls or the driver information display to navigate to Vehicle Settings or TPMS/Tire Pressure Monitor.
- Select Relearn or Reset and confirm your choice.
- After the system confirms the relearn, drive at about 50 mph (80 km/h) or faster for 10 minutes to complete the process.
Not all trims expose a TPMS relearn option in the menu. If you don’t see the option, rely on the highway-drive relearn or consult the owner’s manual for your exact trim level.
What to do if you can’t find the TPMS option
If the TPMS option is not visible in the vehicle’s menu, you likely don’t have a manual relearn feature for your trim. Use highway-speed driving to complete the relearn and ensure all tires are correctly inflated. If the warning persists, there may be a sensor issue or a tire leak that requires professional service.
Additional tips and caveats
Always check tire pressures when the tires are cold, then re-check after a short drive to ensure pressures remain correct. If you’ve recently rotated or replaced tires, a relearn is often necessary. The spare tire’s TPMS status varies by vehicle; some Odysseys do not monitor the spare. If the warning light is stubborn or returns after a successful relearn, have the sensors tested for faults or battery degradation at a dealer or tire shop.
When to seek professional help
If the TPMS light stays on after trying both relearn methods, or if you suspect a damaged TPMS sensor or a tire leak, consult a Honda dealer or qualified tire technician for a diagnostic and potential sensor replacement.
Summary
Resetting the TPMS on a 2016 Honda Odyssey involves inflating all tires to the recommended cold pressures and performing a relearn. This can be done by driving on the highway at around 50 mph for about 10 minutes, or through the vehicle’s TPMS relearn option in the settings if available. If the warning persists, check sensors, consult the owner’s manual for your trim, or seek professional service to diagnose sensor or tire issues.
Where is the TPMS calibration button on a Touring 2016 Honda?
In which case we'll select that. And we'll select calibrate. And now calibration is started only takes a moment. And all your tires have been recalibrated.
How to reset 2016 Honda tire pressure light?
Up you go to settings this is from the home. Screen. You go to vehicle you go to uh TPMS calibration oops oh there we go you click calibrate.
How to reset the TPMS on a 2016 Honda Odyssey?
Steps to Reset Honda TPMS Lights in Newer Models
- From the Home screen, select “Settings”
- Select your vehicle.
- Select “TPMS Calibration”
- Select “Calibrate”
Where is the TPMS reset button on a Honda Odyssey?
For models with a TPMS Button
If your Honda is equipped with a TPMS button, you'll find it to the left of the steering wheel. Press and hold the button until the warning light blinks twice.