The maintenance required (MR) light on a 2010 Toyota Camry can be cleared using the instrument cluster’s trip/odometer reset button with the ignition in the ON position and the engine off. No tools or dealer visit are needed for the standard reset.
Below you’ll find the commonly used reset procedure, plus an alternative method for some trims if the first one doesn’t seem to work. The steps apply to the 2010 Camry (XV40) with the typical instrument cluster and Trip A/Trip B display; your exact sequence may vary slightly by trim or market.
Reset procedure using the odometer/trip meter button
This list explains the standard reset method most Camry owners use to clear the Maintenance Required light.
- Turn the ignition to ON with the engine OFF.
- Locate the trip odometer/reset button near the odometer display on the instrument cluster.
- Press and hold the reset button.
- While continuing to hold the button, turn the ignition OFF, then back to ON (engine still off). Keep holding for about 5–10 seconds until the MR light goes out or the odometer resets to zero.
After releasing the button, turn the ignition OFF and then ON again to confirm the MR light is no longer illuminated when you start the car. If the light returns, repeat once or twice. If it still remains, the vehicle may require actual maintenance or a dealer visit to re-set the reminder properly.
Alternate method for some trims or if the first method doesn’t work
Some Camry trims with different instrument clusters respond to a slightly different sequence. If the standard method does not clear the MR light, try this version.
- Turn the ignition to ON with the engine OFF.
- With the odometer display active, press and hold the reset knob for about 10 seconds or until the MR light blinks and then goes out.
- Release the knob, then turn the ignition OFF and back ON to verify the light is cleared.
If the MR light still won’t reset after attempting both methods, consult the owner’s manual for your exact trim or contact a Toyota dealer. Avoid driving long distances with an unresolved maintenance reminder if you’re unsure about upcoming scheduled service.
Troubleshooting and what to do if the light reappears
If the MR light reappears after a reset, it usually indicates that the configured maintenance interval has not been completed or a service item is overdue. Check your maintenance schedule in the owner’s manual, review any service receipts, and confirm that the required service (oil change, tire rotation, inspections, etc.) has been performed. If uncertain, a dealer or qualified mechanic can verify the maintenance status using a scan tool.
Summary
Resetting the 2010 Toyota Camry’s Maintenance Required light is a quick, tool-free process that uses the odometer/trip reset button with the ignition in ON and the engine OFF. If the first method doesn’t work, trying the alternate sequence for your trim often resolves the reminder. Always ensure the planned maintenance has actually been completed and consult the manual or dealer if the light reappears or remains illuminated after multiple attempts.
How do I reset my Toyota after an oil change?
And hold on the second time. And also press the trip button at the same time to reset your maintenance. Data You'll see the screen blink. And it will start to say resetting maintenance.
How to take off the maintenance light on a Toyota Camry 2011?
And it went out. Start the vehicle. And you will see the uh maintenance required light is out again just so you know position one hold the adometer.
How do I reset the maintenance required on my 2010 Toyota Camry?
So just use that you can see it's at trip A. We'll turn the key. Off. So I'm going to have to now hold this button down.
How to clear maintenance required message on Toyota Camry?
Until you reach vehicle settings. Press okay from here You will find the scheduled maintenance press okay and it will ask you if you want to reset the data. Choose yes and reset is now complete.