To reset the oil life indicator on a 2017 Honda Civic, turn the ignition to ON with the engine off, use the steering wheel’s SELECT/RESET control to reach Oil Life on the instrument display, then press and hold the button until the percentage shows 100%.
What you need to know before you start
The Oil Life indicator is a maintenance reminder that estimates remaining engine oil life based on driving conditions. Resetting it is normally done after an oil change or when service is performed. Do not reset if you have not changed the oil, as the indicator will be inaccurate and could hide when maintenance is actually due.
Step-by-step reset procedure
This procedure covers most 2017 Civic models with the common steering-wheel control and instrument cluster layout.
- Turn the ignition to ON with the engine OFF.
- On the instrument cluster, press the SEL/RESET button repeatedly until the Oil Life display appears.
- Press and hold the SEL/RESET button for about 5 seconds until the Oil Life resets to 100%.
- Turn the ignition OFF, then start the engine to confirm that Oil Life now shows 100%.
After completing these steps, you should see the Oil Life reading return to 100% on the display. If it does not, repeat the steps or consult your owner's manual for model-specific details.
Variations by display type
Steering-wheel controls with an analog/digital combo display (typical setup)
In many Civics, the Oil Life option is accessible by cycling through the instrument cluster menus using the SEL/RESET button on the left side of the steering wheel. The process remains the same: reach Oil Life, then hold to reset.
Digital multi-information display (MID) navigation
Some trims use a digital MID in the instrument cluster for maintenance items. If Oil Life appears on the MID, use the INFO/Menu navigation (often a button cluster near the steering wheel) to highlight Oil Life and press and hold SEL/RESET until it resets to 100%.
Oil change timing and reminders
The Oil Life reset should be performed after an oil change and reset to 100%. It is not a substitute for regular maintenance intervals. Your owner's manual or the vehicle's maintenance minder feature may suggest service intervals based on vehicle usage.
Troubleshooting tips
If you followed the steps and Oil Life does not reset to 100%:
- Make sure the ignition is in the ON position with the engine OFF.
- Ensure you are holding the SEL/RESET button long enough (about 5 seconds) until the display changes.
- Check that you are selecting Oil Life on the display; some models require cycling through the menu to reach it.
- If none of these steps work, there may be a fault in the display or a service bulletin; contact a Honda dealer or certified technician.
In most cases, a failed reset is due to not staying on the Oil Life screen long enough or using the wrong button sequence. A dealer visit should be considered if the indicator still does not reset after repeated attempts.
Summary
Resetting the oil life on a 2017 Honda Civic is a straightforward process that follows the same pattern across most trims: turn the ignition to ON with the engine off, navigate to Oil Life via the steering wheel controls, and hold the reset button until it reads 100%. Always perform the reset after an oil change and verify the reading by starting the engine. If you encounter issues, consult the owner's manual or contact a Honda service center for guidance.
How to reset maintenance light on Honda 2017?
See it's starting to blink now and you're going to press and hold it one more time. Right now mine is at 5% it's kind of blurry hard to see. And there you go 100% simple oil reset 2017 Honda Accord.
How do I reset the oil life on my Honda?
If your display reads “Engine Oil Life,” select the Reset mode by pressing the Info button on the steering wheel. Then press the Select/Reset button to return your oil life to 100%. If your display reads “Engine Oil Indicator %,” press and hold the Select/Reset knob for more than 5 seconds.
How to reset oil life on Honda Civic after oil change?
Near your speedometer, there should be a “SEL/RESET” button. Press that button until you get to the “Oil Life” screen. Now press and hold the “SEL/RESET” button until the “Oil Life” screen begins flashing. Once it starts blinking, press and hold the “SEL/RESET” button again.
How to reset 2017 oil life?
On. Cycle some oil through get it all pumped through. There we'll go ahead and turn it off again.